Voorbereiding

DROOGOVEN

Voor het drogen van thermovormplaten, instrumenten, modellen ...

Trekt vocht af en houdt thermovormplaten droog om poriënvorming te voorkomen.
Instrument drogen.
Drogen van gipsmodellen enz.

Een ventilator circuleert de hete lucht en zorgt voor een gelijkmatige droging.
Temperatuurbereik: 35-75 ºC.
Stroomverbruik: 550-650 W.
6 roestvrijstalen bakjes.
RVS behuizing.
24-uurs timer.
Spanning: 220-240 V, 50/60 Hz.
Hoogte: 310 mm / Breedte: 340 mm / Diepte: 450 mm / Gewicht: 8,3 kg

A-Silicone for laboratory model duplication.
Ideal for duplicating stumps using the all ceramic technique and models with accentuated undercuts and investments.
Use of a plastic duplication flask is recommended.

Advantages

• Rapidity: a duplicate can be obtained in just 10 minutes (23°)
• Mixing facilitated by the 1:1 base to catalyst ratio
• High fluidity: does not require mixing in a vacuum
• Absolute precision for faithful reproduction of detail
• Dimensional stability over time and non-deformability, allowing a number of duplications to be made
• Compatible with all plasters, polyurethane resins, phosphate and alcohol based investments and acrylic resins

Characteristics

• Fast setting time
• Extreme fluidity
• Excellent elasticity, thanks to the 16 Shore A hardness
• Purple for better definition of detail

Zhermack recommends using:

• Tensilab, alcoholic based surface-active spray solution
• Doublemix, automatic mixer for duplication A-Silicones

Cavex CA37 Fast Set
20 x 500 gr

Features :

- worldwide reference
- firm consistency
- more rigid impression
- good tear and deformation resistance
- detail reproduction at least 50µm
- dust free
- pink peppermint aroma
- compatible with all types of gypsum, smooth gypsum surface
- patient friendly setting times in mouth

Normal Set 1.30 minutes
Fast Set 1 minute

Cavex CA37 Normal Set
20 x 500 gr

Features :

- worldwide reference
- firm consistency
- more rigid impression
- good tear and deformation resistance
- detail reproduction at least 50µm
- dust free
- pink peppermint aroma
- compatible with all types of gypsum, smooth gypsum surface
- patient friendly setting times in mouth

Normal Set 1.30 minutes
Fast Set 1 minute

ArticulatOr Balance De Luxe Hager & Werken


De betrouwbare articulator met individueel instelbare condylus inclinatie
Een functioneel, precies en esthetisch werkinstrument dat indruk maakt door zijn lange levensduur en hoge rendabiliteit
Verkrijgbaar in constructiehoogte 105 mm (meting zonder montageplaten)
Voor individuele preparaties van volledige gebitsprotheses en voor kroon- en brugtechniek Uitbreidbaar met talrijke accessoires, en toepasbaar in alle werkgebieden

Technische gegevens:
Condylus inclinatie: -10° - +70°
Incisale tafel: 5° Bennett Angulation: 0° - 25°
Intercondylaire afstand: 100 mm

Set bestaat uit:
Articulator, Incisal Tafel 5°, bevestigingsplaten (2), incisale pin (1), elastiekjes en sleutel

Articulator zonder gips Galetti Original

De Galetti Articulator is stevig gebouwd van metaallegering gietwerk.
De hoogwaardige articulator zorgt voor gemakkelijke, snelle en stevige grepen van modellen van elk formaat.
Dit artikel heeft een perfecte occlusaal-articulator balans om cuspidal interferenties te voorkomen en een gebalanceerd prothetisch apparaat te handhaven.

Met deze articulator kunnen boven- en ondercomponenten gemakkelijk worden gescheiden om twee verschillende stabiele werkbasissen te vormen.
Het kogelgewricht maakt vrije beweging van het bovenstuk mogelijk om het occlusaal-articulatorevenwicht te controleren.
De scharnieras met bilaterale beweging maakt anterieure, posterieure en laterale bewegingen mogelijk om werk- en balansbewegingen te tonen.

Er is geen gipswerk of toebehoren nodig, en ze zijn gemakkelijk te reinigen.

Order no.188500Description (name)ERKOFORM-3dadditional infoContents1Unit of contentspieceMedical device infono medical deviceCE-labeling infoitem is labeled CEHazardous material infoitem is not hazardousCountry of originorigin of item is the EUApplication fieldFor all dental thermoforming.UsageAs a short instruction the touchpanel leads you through the thermoforming process and urges you to take necessary steps. All ERKODENT thermoforming materials are covered in the software. Just choose the desired material and thickness from the touchpanel and press on start. If you wish, for special applications you can modify the shown heating and cooling down times without modifying the standards. The display always gives information about what is happening and how much time is remaining for the actual step. If you do not execute the next step, for safety reasons the machine switches off after 10 sec. It is easy to add new thermoforming materials to the software.Product-descriptionVacuum thermoforming unit with touchless temperature control, reserve vacuum and touch panel. No compressed air supply is required - just plug and play. No preheating time. Sudden vacuum, built up before thermoforming process (Pat. 19511064). More space for higher models. Perpendicular prestretching and forming produces results of even foil thicknesses. Completely accessible model during the heating process. Handy one-hand foil fixation for foil thicknesses ranging from 0 to 5 mm. The Occluform-3 can be installed (accessory).

MINISTAR S®
The new generation of the successful handy pressure 230 V 3500
moulding machine now equipped with Scan technology 115 V 3510
and 4 bar working pressure. The coded pressure 100 V 3520
moulding plate is read by the scanner, allowing
programming of all important data such as heating time,
temperature and cooling time. In other words: Precise
pressure moulding results in record time thanks to the
extremely fast, patented heater and the high working pressure.
Power: 230 V / 115 V, / 100 V, 850 VA
Working Pressure: 0.5 – 4.0 bar
Dimensions: 420 x 350 x 190 mm (l x w x h)
Weight: 9 kg

The Erkoform-3d+ has the same characteristics as the Erkoform-3dmotion but without automated thermoforming process. Also the touchpanel functions are the same. A large volume reserve vacuum is being held to allow a sudden forming. A sensor for touchless temperature measurement ensures the accurate temperature of the material for the thermoforming regardless of the ambient temperature. The unit is equipped with a medium-wave infrared heating, which doesn’t need preheating time. The medium-wave allows for the materials to heat up not only on the surface but also in-depth. The result is a less stressed splint. The Occluform-3 can be installed (accessory).