Losse Prothese
-
Alloy Primer 5Ml Kuraray 064Eu
€ 61,99
ALLOY PRIMER is een metaalconditioner, die de hechtkracht van composiet aan goud, onedele en half edele metalen, titanium en andere dentale legeringen vergroot. Het zorgt voor een excellente hechting aan metalen oppervlakken. Dankzij de unieke chemische eigenschappen van ALLOY PRIMER hecht composiet goed aan zulke legeringen. ALLOY PRIMER kan ook worden gebruikt tijdens de reparatie van gebroken restauratieve materialen in de tandartspraktijk en in het laboratorium.ALLOY PRIMER is erg eenvoudig en zuinig in gebruik. Breng een laag ALLOY PRIMER op een gezandstraald metalen oppervlak aan en laat die 3 seconden
inwerken. Vervolgens wordt de adhesiefprocedure zoals gebruikelijk uitgevoerd.Kenmerken:
- breed indicatiegebied
- intra- en extraoraal gebruik
- verhoogt de hechtkracht aan goud
- verhoogt de hechtkracht aan halfedele metalen
- eenvoudig in gebruik
- tijdbesparendIndicaties:
- adhesie van metalen kronen, bruggen, inlays, onlays en stiften en stompen
- reparatie van gebroken kronen op composietbasis en van metalen kronen en bruggen met een porseleinlaag
- vervaardiging van frameprothesen
- reparatie van frameprothesenInhoud:
1 flesje 5 ml -
Castaflask Flask voor Casta...
€ 84,26Stoomjet-apparaat handmatig vullen
De nieuwe krachtige STOOMKOKER 1 zet nieuwe normen op het gebied van betrouwbaarheid en duurzaamheid, terwijl hij zich onderscheidt door zijn uitstekende reinigingskracht.
Al het gebruikelijke vuil kan in een mum van tijd worden verwijderd. Dankzij de handmatige vulling kan deze vrijwel overal worden geïnstalleerd.
Voordelen
Lange levensduur van het verwarmingssysteem: Het verwarmingselement wordt in de bodem van de ketel gegoten en dus beschermd tegen water, kalksteen en reinigingsproducten.
Verbeterde operationele veiligheid en betrouwbaarheid dankzij real-time schaalweergave.
Eenvoudig reinigen van de druktank dankzij een zeer grote revisieopening. Verbonden bediening en extra functies beschikbaar via een Renfert CONNECT Stick*-toepassing.
* (optionele accessoires verkrijgbaar vanaf eind 2022. Beperkte beschikbaarheid in sommige landen)
Details
Constante en efficiënte reinigingskracht dankzij een vermogen tot 2,000 W en een druk van 4.5 bar en een IT-stoommondstuk.
Kan bijna overal worden geïnstalleerd dankzij handmatig vullen.
Eenvoudige en veilige stoomreiniging dankzij het ergonomische handstuk (de behuizing zuigt elektrostatische ontladingen betrouwbaar af).
Vul het apparaat eenvoudig met water of ontkalkingsproduct dankzij de praktische trechtervormige vuldop.
Mogelijkheid om het apparaat aan een muur te bevestigen met de wandbucky als optie verkrijgbaar. -
Castapress 1 Kg Vertex N°3
€ 122,74Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear.
-
Castapress 1 Kg Vertex N°5
€ 122,74 -10% € 110,47Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear.
-
Castapress 1000ml Vertex
€ 87,89Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear.
-
Castapress 4 Kg Vertex N°10
€ 273,89Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear.
-
Castapress 4 Kg Vertex N°3
€ 273,89Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear.
-
Castapress 4 Kg Vertex N°5
€ 273,89Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear.
-
Castapress 4 Kg Vertex N°7
€ 273,89Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear.
-
-
Cobavest 1000Ml Yeti 941-1000
€ 20,42COBAVEST Investment for Partial Denture, suitable to be used for the traditional preheating method but also as speed investmentCOBAVEST is a phosphate-bonded precision investment material to be used in the partial denture technique, for Silicon, Polyether and also Gel duplications.COBAVEST can be used at low preheaating temperature, for model duplications without hardening or dipping of the models.
-
Crochets Boule 0.7 Mm 100...
€ 56,39SCHEU-Anchor 0.7 mm
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
Clasps and Bars -
Crochets Boule 0.8 Mm 100...
€ 56,39SCHEU-Anchor 0.8 mm
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
Clasps and Bars -
Crochets Boule 0.9 Mm 100...
€ 56,39SCHEU-Anchor 0.9 mm 100 Pcs
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
Clasps and Bars. -
crochets boules 1.0 mm 100...
€ 56,39SCHEU-Anchor 1.0 mm - 100 Pcs
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
Clasps and Bars -
-
Implacryl 250 Ml Vertex
€ 20,79Vertex Implacryl Indications:dentures fitted on implants full and partial dentures Description:Vertex™ Implacryl is a heat-curing extra strong denture base material developed for the production of complete and partial dentures and in particular for over-dentures on implants. The pressing technique is the processing method for Vertex™ Implacryl. Using high impact acrylic in implant work is educated at the Vertex™ Dental Academy to prevent breaking of dentures due to the lack of space. Technical specifications:Dough time20 - 25 minutesWorking time5 - 7 minutesCuring timeStart at 70° for 90 minutes 30 minutes at 100°CMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (monomer)2.1 g powder (polymer)Impact-resistance2.8 kJ/m2Flexural strength77.1 MPaFlexural modulus2330 MPaWater sorption24.3 µg/mm3Solubility0.14 µg/mm3 Shades:* 3 (translucent pink)* 5 (pink, veined)* 7 (blue-pink, veined)* 8 (blue-pink)* 10 (translucent pink, veined) Packaging:150 g500 g1.000 g10.000 g25.000 g75 ml
-
Implacryl 500 Gr N°3 Vertex
€ 109,68Vertex Implacryl Indications:dentures fitted on implants full and partial dentures Description:Vertex™ Implacryl is a heat-curing extra strong denture base material developed for the production of complete and partial dentures and in particular for over-dentures on implants. The pressing technique is the processing method for Vertex™ Implacryl. Using high impact acrylic in implant work is educated at the Vertex™ Dental Academy to prevent breaking of dentures due to the lack of space. Technical specifications:Dough time20 - 25 minutesWorking time5 - 7 minutesCuring timeStart at 70° for 90 minutes 30 minutes at 100°CMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (monomer)2.1 g powder (polymer)Impact-resistance2.8 kJ/m2Flexural strength77.1 MPaFlexural modulus2330 MPaWater sorption24.3 µg/mm3Solubility0.14 µg/mm3 Shades:* 3 (translucent pink)* 5 (pink, veined)* 7 (blue-pink, veined)* 8 (blue-pink)* 10 (translucent pink, veined) Packaging:150 g500 g1.000 g10.000 g25.000 g75 ml