Thermoforming Apparaat

  • Erkoform 3D+ Erkodent 188600

    € 2.103,85

    Order no.188500Description (name)ERKOFORM-3dadditional infoContents1Unit of contentspieceMedical device infono medical deviceCE-labeling infoitem is labeled CEHazardous material infoitem is not hazardousCountry of originorigin of item is the EUApplication fieldFor all dental thermoforming.UsageAs a short instruction the touchpanel leads you through the thermoforming process and urges you to take necessary steps. All ERKODENT thermoforming materials are covered in the software. Just choose the desired material and thickness from the touchpanel and press on start. If you wish, for special applications you can modify the shown heating and cooling down times without modifying the standards. The display always gives information about what is happening and how much time is remaining for the actual step. If you do not execute the next step, for safety reasons the machine switches off after 10 sec. It is easy to add new thermoforming materials to the software.Product-descriptionVacuum thermoforming unit with touchless temperature control, reserve vacuum and touch panel. No compressed air supply is required - just plug and play. No preheating time. Sudden vacuum, built up before thermoforming process (Pat. 19511064). More space for higher models. Perpendicular prestretching and forming produces results of even foil thicknesses. Completely accessible model during the heating process. Handy one-hand foil fixation for foil thicknesses ranging from 0 to 5 mm. The Occluform-3 can be installed (accessory).

  • Erkoform-3d motion Erkodent...

    € 2.399,95

    The Erkoform-3d+ has the same characteristics as the Erkoform-3dmotion but without automated thermoforming process. Also the touchpanel functions are the same. A large volume reserve vacuum is being held to allow a sudden forming. A sensor for touchless temperature measurement ensures the accurate temperature of the material for the thermoforming regardless of the ambient temperature. The unit is equipped with a medium-wave infrared heating, which doesn’t need preheating time. The medium-wave allows for the materials to heat up not only on the surface but also in-depth. The result is a less stressed splint. The Occluform-3 can be installed (accessory).

  • Ministar S Moulding Machine...

    € 2.304,00

    The new generation of the successful handy pressure 230 V 3500
    moulding machine now equipped with Scan technology 115 V 3510
    and 4 bar working pressure. The coded pressure 100 V 3520
    moulding plate is read by the scanner, allowing
    programming of all important data such as heating time,
    temperature and cooling time. In other words: Precise
    pressure moulding results in record time thanks to the
    extremely fast, patented heater and the high working pressure.
    Power: 230 V / 115 V, / 100 V, 850 VA
    Working Pressure: 0.5 – 4.0 bar
    Dimensions: 420 x 350 x 190 mm (l x w x h)
    Weight: 9 kg

  • Occluform 3 Erkodent 188580

    € 624,66

    Order no.188580Description (name)OCCLUFORM-3additional infoContents1Unit of contentspieceMedical device infono medical deviceCE-labeling infoitem is not labeled CEHazardous material infoitem is not hazardousCountry of originorigin of item is the EUApplication fieldThe opposing bite is imprinted directly in the Erkoform-3 and -3d during the thermoforming process.UsageThe construction with a single column allows best model accessibility. Plaster-free model fixation. Hydraulic fixation of the opposing bite.Product-descriptionOccludator integrated in a thermoforming unit for imprinting the opposing bite. The Occluform-3 can only be installed at Erkoform-3 units. The construction of the Occluform-3 device is based on a Bonwill triangle with a side length of 11.5 cm an a Balkwill angle of 20 degrees.

  • Vacuum Forming Machine...

    € 806,15

    Thermovormend apparaat Termaanlast II

    Het is goedkoop, gebruiksvriendelijk en heeft een aantrekkelijk ontwerp.

    Hij heeft een krachtige zuigmotor met automatische aansluiting wanneer de bladhouder naar beneden gaat.

    De keramische verwarmer maakt een progressieve en gelijkmatige verwarming mogelijk van het materiaal dat thermogevormd zal worden.

    Het kan worden gebruikt met vierkante of ronde vellen.

    Vierkante vellen: 120 tot 131 mm
    Ronde vellen: 120 tot 134 mm.

    De machine wordt geleverd met een modelhouder en een mand die kan worden gevuld met korrels (een doos wordt bij de machine geleverd) om de diepte van de opmaak te verkleinen.

    Technische specificatie

    Afmetingen: (L) 300 x (L) 270 x (H) 430 mm
    Gewicht: 6 kg
    Power : 925W