Materiaal

  • 3D Printer LCD1 - Nextdent...

    € 5.495,12

    Een revolutie in uw bedrijfDe NexDent LCD1 3D printer aangedreven door de revolutionaire Figure 4 ™ technologie, gecombineerd met NextDent's uitgebreide portfolio van tandheelkundige materialen, voldoet aan vele indicaties en biedt een ongekende snelheid, nauwkeurigheid, herhaalbaarheid, productiviteit en total cost of ownership.De NextDent LCD1 maakt hogesnelheids-3D-printen mogelijk voor de productie van tandheelkundige apparatuur en opofferingsafgietsels. Deze revolutionaire oplossing biedt een baanbrekende waardepropositie die ongeëvenaarde snelheid en prestaties combineert met betaalbaarheid voor vrijwel elk laboratorium of kliniek.Betrouwbare end-to-end workflowDe NextDent LCD1 is volledig compatibel met de gangbare intra-orale scan- en softwareoplossingen en levert elke keer weer nauwkeurige resultaten met minimale menselijke tussenkomst. Combineer de printer met andere componenten van de 3D Systems tandheelkundige oplossing om een complete en betrouwbare workflow te creëren. Dit omvat de NextDent LC-3DMixer voor optimale materiaal agitatie, en de NextDent LC-3DPrint Box voor UV post-curing.Ervaring waarop u kunt vertrouwen3D Systems heeft zijn 30 jaar ervaring met 3D printen ingezet in samenwerking met de toonaangevende ontwikkelaar van biocompatibele 3D printmaterialen voor tandheelkundige producten om de NextDent LCD1 oplossing te bieden. Deze uitgebreide oplossing vertegenwoordigt toonaangevende materialen en printinnovatie, expertise in de tandheelkundige industrie en naleving van de regelgeving in alle belangrijke markten om uw workflow te revolutioneren.Belangrijkste kenmerken van de NextDent LCD1 :- Nauwkeurigheid, herhaalbaarheid, ongeëvenaarde productiviteit en lage totale eigendomskosten- Diagnose en reparatie op afstand - 2 jaar garantie inclusief LCD paneel - 3 keer sneller dan SLA printers / evenaart DLP printsnelheden - Supergladde oppervlakteafwerking - Formaat en functie geschikt voor klinische gebruike...

  • Bender II - Plieuse de fil...

    € 22.000,12

    Au choix Bender 2 Round Type (fil rond) ou Bender 2 Rectangular type ( fil rectangulaire ou carré)Formation certifié GI Dental pour vous faciliter la prise en main4 tubes de fils Dentaurum inclusPrécision numérique exceptionnelle pour un ajustage parfait à chaque patientLogiciel FixR inclus avec la machineGain de temps immédiat et économie instantanéeSolution complète au sein de votre cabinetCollage du dispositif de rétention aux dents des patients le même jour que le décollement des brackets et des bagues.Fil de contention réalisé en moins de 7 minutes, le patient peut patienter sur placeSimple d’utilisation, machine petite et légère, très peu encombranteParfaite adaptation et intégration au sein d’un cabinet au centre dentaireCompatible avec toutes les solutions de dentisterie numériques du marché

  • Dental Wings Scanner Dw7 -...

    € 15.900,12

    HIGH SCANNING PERFORMANCE
    Be it a single preparation, a full arch gypsum model or a triple-tray impression, the 7DS efficiently captures clinical data. It scans preparations with excellent marginal integrity, providing precise fit for a wide variety of dental indications. Specifically for Screw Retained Bars and Bridges (SRBB), we have developed a certified scanning workflow.

    The scanning performance of the 7DS is the result of a combination of years of mechanical engineering experience with state-of-the-art technology components. The optical set-up, running with five axes of freedom and two high-speed cameras, gives access to a superior scanning volume (140 mm x 140 mm x 140 mm) with a high degree of accuracy. The scan chamber is large enough for fully articulated models.

    DESIGN-READY FOR SEVERAL DENTAL INDICATIONS
    The 7DS is ready for receiving digital impressions from clinics and for complete in-lab digital workflow. As it includes a versatile DWOS software package, it enables the dental technician to design crowns & bridges, partial frameworks, screw-retained bars & bridges, implant abutments, and more. Virtual models can be generated from impression scans and output for fabrication.

    THE 7DS HIGHLIGHTS :
    High precision scanning of both models and impressions
    On-board computer with 64-bit processor
    High productivity through automatic scan and design wizards
    High capacity scan and design for dies: 30 copings in 15 minutes
    Easy clinic-to-lab or lab-to-outsourcing communication with DWOS Connect
    SAM® SE articulator included
    Certified scan workflow for screw-retained bars & bridges (optional)
    Certified by 3M ESPE, Straumann and Dentsply Implants

  • EASY 5+ Axis (Only Dry)...

    € 29.500,12

    EASY 5+ USINAGE DES DISQUES CAD-CAM Technologie Direct Disc : Grâce à ce système de serrage des disques sans outil, la machine peut être chargée rapidement et facilement. Ioniseur intégré : Neutralise la charge statique des particules acryliques. La circulation d'air dans la zone de travail permet un nettoyage facile et rapide. Caractéristiques : 5 axes serrage automatique des disques ioniseur intégré 16 outils Usinage à sec Option 3 blocs à sec Caméra intégrée Epaisseur de disque jusqu'à 40 mmUne précision incomparable Restaurations en Ultra-HD Broche haute qualité dotée de 4 roulements en céramique hybride pour assurer une concentricité optimale Précision de répétition de 3 µm Puissance et robustesse Usinage des matériaux les plus résistants actuellement sur le marché, y compris les alliages CoCr Broche solide supportant 500 watts et 60.000 tr/min Excellente qualité industrielle pour une rigidité élevée Fonte moulée massive pour limiter les vibrations Une indépendance maximale Choix illimité de matériaux en format rondelle de 98 mm, blocs et piliers préfabriqués Variété maximale des indications grâce à un angle de rotation de ±35° dans le 5ème axe et à des rondelles vierges d’une épaisseur de 40 mm Une fiabilité allemande éprouvée 100% développée et fabriquée en Allemagne Concept ingénieux d’utilisation d’air comprimé pour protéger la mécanique, l’électronique et la broche Webcam pour la maintenance à distance Connexion Ethernet pour des connexions longue distance stables Excellente rentabilité Ioniseur et circulation de l’air optimisée pour un entretien simplifié de la machine DirectDiscTechnology pour une fixation révolutionnaire des disques Echangeur automatique pour 16 outils Logiciel DentalCAM parfaitement compatible inclus dans le prix - aucun frais de licence Logiciel d'usinage DentalCAM Suite logicielle performante avec import STL compatible avec tous les programmes de CAO courants Stratégies optimisées de FAO pour un traitement dans les plus bre...

  • Element Fraiseuse (Dry) -...

    € 20.750,12

    Pas d’air compriméEpaisseur de disques jusqu’à 40 mmUsinage 5 axes à secUtilisation optimale du disqueChangeur automatique 17 outilsOption : Support 6 blocsOutils avec code couleurSimplement FACILEOptimisez votre flux de travail numérique, profitez d'une liberté maximale et obtenez des résultats parfaits avec une efficacité optimale.Fraisage à sec 5 axes au plus haut niveau. Avec un fonctionnement extrêmement simple.Les meilleurs résultats en toute simplicitéLa machine a été développée avec un poids optimisé de seulement 43 kg et a été fabriquée sans compromis à partir de composants industriels de haute qualité, répondant ainsi à notre exigence de créer la perfection . Comment en bénéficiez-vous ? ELEMENT obtient des résultats impressionnants de première classe !Pas besoin d'air comprimé grâce à AIR TOOLUne grande innovation de ELEMENT est qu'elle n'utilise pas d'air comprimé : ELEMENT ne nécessite ni connexion d'air comprimé externe ni compresseur intégré, ce qui est possible avec notre AIR TOOL en instance de brevet .Les aubes de turbine de l'AIR TOOL utilisent les vitesses élevées de la broche haute fréquence pour générer un flux d'air puissant qui maintient la pièce à usiner exempte de poussière et de copeaux. Ceux-ci sont éliminés par aspiration.Liberté maximaleELEMENT vous permet non seulement d'usiner des disques ; vous pouvez utiliser le support approprié pour traiter jusqu'à 6 blocs de différentes tailles avec un minimum d'effort.Changeur d'outils automatique pour 16 outils standard plus un AIR TOOLMalgré sa conception compacte, ELEMENT offre une chambre de travail généreuse avec beaucoup d'espace pour serrer les pièces ou charger le changeur d'outils automatique

  • PREMIUM + 4 axis Milling...

    € 24.000,12

    Premium+ is a wet grinding machine for glass ceramics and composites which has been newly developed from scratch. Its highest precision and the quick drive units, are combined here with a closed liquid cooling system in an extremely compact housing. So you will get first-class grinding results in shortest time with the Premium+ Impression.

  • Pro-Expert 5 Milling...

    € 40.000,12

    Versatile dental milling machines.

    Pro-Expert 5 have five simultaneously working axes and are designed for dry machining as well as for wet machining. The second rotary axis (B axis) with a rotation range of up to ± 30 degrees enables you to mill undercuts.
    Not just for dry machining: Pro-Expert 5 are prepared for connecting the wet grinding module

  • SENTRY 200 - 3D printer -...

    € 8.600,12

    Sentry 200

    Een compacte, veelzijdige en nauwkeurige printer

    Het is een printer gemaakt in Frankrijk

    Afmetingen 410 X 360 X h 605 mm
    Drukvolume 192 X 122 X h 200 mm
    Toepassingen PEI / Model / Aligner / Volledige prothese / Kunstgebit basis / Tijdelijke kronen en bruggen / Passen / Soft tissue / Uitbrandbare / Indirecte bonding tray / Harde tray en orthodontische plaat / Chirurgische richtplaat
    Z-as nauwkeurigheid 10 tot 300 micron
    XY resolutie 50 micron
    405 nanometer golflengte

    De Sentry 200 is een state of the art printer die kan printen :

    - 8 Horizontale bogen bij 100µm: 35 minuten
    - 24 Verticale bogen op 100µm : 1u40
    - 6 Verticale aligner in 100µm : 55 minuten
    - 4 Horizontale uitbrandbare in 50µm : 1u30
    - 9 Verticaal Individuele afdruklepel in 200µm : 1u20
    - 10 Verticale complete prothese in 100µm : 1u40
    - 4 Horizontale Chirurgishe richtplaat in 100µm : 55 minuten

  • SENTRY 300 - 3D printer -...

    € 15.000,12

    Sentry 300

    Een compacte, veelzijdige en nauwkeurige printer

    Het is een printer gemaakt in Frankrijk

    Afmetingen 410 X 360 X h 605 mm
    Drukvolume 192 X 122 X h 200 mm
    Toepassingen PEI / Model / Aligner / Volledige prothese / Kunstgebit basis / Tijdelijke kronen en bruggen / Passen / Soft tissue / Uitbrandbare / Indirecte bonding tray / Harde tray en orthodontische plaat / Chirurgische richtplaat
    Z-as nauwkeurigheid 10 tot 300 micron
    XY resolutie 50 micron
    405 nanometer golflengte

    De Sentry 300 is een state of the art printer die kan printen :

    - 8 Horizontale bogen bij 100µm: 35 minuten
    - 24 Verticale bogen op 100µm : 1u40
    - 6 Verticale aligner in 100µm : 55 minuten
    - 4 Horizontale uitbrandbare in 50µm : 1u30
    - 9 Verticaal Individuele afdruklepel in 200µm : 1u20
    - 10 Verticale complete prothese in 100µm : 1u40
    - 4 Horizontale Chirurgishe richtplaat in 100µm : 55 minuten

  • Shera Iso-3D 100gr...

    € 23,00

    SHERAiso-3d
    3D-geprinte plastic isolatie

    - duidelijk zichtbare isolatiezone
    - Slechts eenmaal toepassen
    - bespaart tijd en apparatuur
    - hecht ook aan was
    - beschermt het patroon tegen occlusieve verf
    - In water oplosbaar en wasbaar

  • Simplex Isolating model 3D...

    € 33,00 -20% € 26,40

    SIMPLEX model isolatie

    Isolatie voor 3D geprinte modellen
    SIMPLEX modelisolatie is een isolator ontworpen voor modellen die 3D geprint zijn met een filament systeem.
    Deze kant-en-klare isolator maakt het heel eenvoudig om orthodontische hulpmiddelen van tandhars op het geprinte model te maken.
    Het wordt aangebracht met een kwast en vormt een gelijkmatige, zeer dunne isolerende laag op het oppervlak van het model.
    Het resultaat: de modelhars en de tandhars zijn perfect gescheiden.
    Na polymerisatie kan het afgewerkte object eenvoudig van het model worden losgemaakt, waarbij alle oppervlaktedetails behouden blijven.

    Voordeel

    Geschikt voor modellen gemaakt met filament 3D-printing, ontworpen voor het isoleren van modellen bij het maken van uitneembare orthodontische hulpmiddelen.
    Ook geschikt voor modellen gemaakt met SLA/DLP printprocessen.
    Een enkele laag is voldoende voor een optimale scheiding tussen model en object.
    Verwijdert volledig met water en vereist geen reiniging met stoom, waardoor het gemakkelijk te gebruiken is en schade aan het materiaal wordt voorkomen.

    Detail

    Vrij van stoffen die schadelijk zijn voor de gezondheid.
    Perfect isolerend effect.
    Optimale, zeer dunne isolerende laag.
    Volledig verwijderbaar met water.
    Schaadt het materiaal niet.

  • Transparent tray for Otoflash

    € 21,50

    Flash-curing device for rapid and reliable curing of light curable resins

    Dimensions of polymerisation chamber: 120 x 120 x 50 mm
    Number of light sources: 2 flashbulbs à 100 w
    Capacity: 4 BTE-aids or 6 ITE-aids
    Rated voltage: 100, 117, 230 volt AC, adjustable by switch
    Rated frequency: 50/60 Hz
    Power input: 250 watt
    Spectral distribution: 280-700 nm, maximum between 400 and 500 nm
    Average flash power: 200 watt
    Flash frequency: 10 flashes per second
    Digital timer: adjustable from 1 to 9.999 flashes
    Dimensions: 310 x 310 x 140 mm
    Weight: 6 kg: 6 kg

  • Varseo XS - 3D Printer -...

    € 0,12

    Flash-curing device for rapid and reliable curing of light curable resins

    Dimensions of polymerisation chamber: 120 x 120 x 50 mm
    Number of light sources: 2 flashbulbs à 100 w
    Capacity: 4 BTE-aids or 6 ITE-aids
    Rated voltage: 100, 117, 230 volt AC, adjustable by switch
    Rated frequency: 50/60 Hz
    Power input: 250 watt
    Spectral distribution: 280-700 nm, maximum between 400 and 500 nm
    Average flash power: 200 watt
    Flash frequency: 10 flashes per second
    Digital timer: adjustable from 1 to 9.999 flashes
    Dimensions: 310 x 310 x 140 mm
    Weight: 6 kg: 6 kg