Printermateriaal

  • Agitateur de resine Mestra...

    € 446,25

    Practical and economical device for shaking photopolymerizable resin bottles.
    To obtain a homogeneous mixture of the resin.
    Indispensable for successful achievements with the 3D printer.

  • Alcool Isopropylique 99.9%...

    € 6,99

    ZIRCONE DISK 98 mm pre-shaded

    The pre-shaded Zirconia is available in 16 colors with same translucency like the SHT material, but is eliminating the need of staining or dipping. Accurate colors after sintering makes it for technicians easier to achieve stable and esthetic results. Thanks to the innovative and brilliant craftmanship, the SHT pre-shaded material will save you time and costs and provide remarkable restorations.

    CE 0197

    Translucency : 43%
    Bending Strength : > 1000 Mpa
    Hardness : 1250 Hv10

  • Fleet M Brown - UV Resin...

    € 150,00

    3D printing UV Resin
    405 nm

    - Shake well before use.
    - Wear gloves and mask before use, avoid direct skin contact.
    - Wash with plenty of fresh water if there is any accidently skin.
    - Do not orally, keep away from children.
    - The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
    - Using temperatue : 25 - 30° C

  • Fleet M Sand - Resin UV...

    € 150,00

    3D printing UV Resin
    405 nm

    - Shake well before use.
    - Wear gloves and mask before use, avoid direct skin contact.
    - Wash with plenty of fresh water if there is any accidently skin.
    - Do not orally, keep away from children.
    - The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
    - Using temperatue : 25 - 30° C

  • FotoDent Tray2 - Green...

    € 166,46

    FotoDent® tray2 385/405 nm

    Geoptimaliseerde, biocompatibele hars voor de vervaardiging van tandheelkundige, individuele afdruklepels. Hoge reactiviteit met lage viscositeit. Vereenvoudigde reiniging en verbeterde mechanische eigenschappen. Twee keer snellere afdruktijden, laagdiktes van 300 µm mogelijk. De afgewerkte afdruklepels hebben een homogeen oppervlak, wat de handmatige nabewerking aanzienlijk vermindert.

    Highlights

    Hoge afdruksnelheid
    Eenvoudige reiniging
    Extreem hoge breeksterkte

  • IMPRIMO LC IBT,...

    € 306,18

    Light-curing, flexible resin for fabrication of transfer masks in the indirect bonding technique, transparent.
    Compatible with DLP systems with a light source of 385 nm.

    Density: approx. 1.1 g/ml
    Viscosity: At 23 ° C approx. 2.5 PAS
    Material hardness after curing: approx. 40 shore D

  • Varseo Smile Crown plus A2...

    € 349,00



    De SR 852 “Luxor Ceramic” is de laatste generatie oven voor het stoken van keramiek, wordt beheerd door een elektronische regeling die is ontworpen om het werk van de technicus in al de fasen van de werkcyclus extreem te vereenvoudigen en te verlichten.

    Dit zijn de belangrijkste innovaties die door de elektronische besturing zijn geïntroduceerd:

    Een zeer krachtige 16-bits microprocessor; een frontale encoder voor de invoer en het onderzoek van zowel data als functies;
    Een flash-geheugen dat door de operator via internet opnieuw kan worden ingesteld en bijgewerkt (hierdoor kan de oven op elk moment worden bijgewerkt met de laatste softwareversie)
    ;het LCD-scherm wordt verlicht door een blauw licht dat het contrast en de helderheid van de beelden improviseert.

    Het fornuis kan maximaal 100 programma's onthouden, met 15 functies (variabelen) per programma, kan het vacuümniveau regelen en de koelsnelheid regelen.
    Alle tnese eigenschappen samen met een eenvoudige en robuuste mechanica maken van deze “Luxor Ceramic” een zeer flexibele oven perfect om elk soort keramiek fijn.

    Technische specificaties: SR 852


    Voeding 230 V - 50/60 Hz
    Vermogen (geen pomp) 1200 W.
    Zekeringen 10 A
    Afmetingen 40 (L) x 44 (P) x 50 (H) cm.
    Gewicht 30 kg
    Beschikbare programma's 100
    Functies (variabelen) per programma 15
    Temperatuurkalibratie JA
  • VarseoWax CAD/Cast 1kg Bego...

    € 314,90

    VarseoWax CAD/Cast

    The resin for 3D printing of burn-out CAD/Cast partial denture frames and press-to-metal templates

    Can be burned out without leaving any residue – provides optimal conditions for pore-free, smooth and precise partial dentures

    Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time

    Further processing with the investment materials VarseoVest P plus and VarseoVest C&B, specially developed for shock-heat investing of 3D printed objects possible

    Excellent dimensional stability of the printed objects enables deformation-free investment and thus an excellent accuracy of fit of the casted objects

    Printed plastic boasts first-class green strength, so that no lightcuring is necessary if frames are processed immediately – results in unparalleled process time savings

    Technical specifications

    Color yellow
    Modulus of elasticity = 1,500 MPa
    Viscosity 600 – 900 mPa*s
    Shore hardness D 79 – 83 D
    Density at 22 °C 1.08 g/cm³
    Thermal stability at 55 °C 1.8 MPa
    Flexural strength = 50 MPa
    Residual ash content = 0.1 % bei 700 °C
    Wavelength 405 nm

  • VarseoWax Model, gray 250 g...

    € 59,00

    Resin for solid or hollow 3D printing of dental full and partial models as well as models with removable dies.

    Suitable for duplication with silicone or gel as well as for the fabrication of splints, aligners, etc. using the thermoforming technique.

    Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time.

    The dimensional stability and the smooth and pore-free surfaces of the printed models are the ideal basis for the fabrication of high-precision restorations.

    Can be insulated against adhesive wax, is resistant to moisture in order to facilitate problem-free cleaning and accordingly, its handling during processing is comparable to that of a conventional plaster model.

    Optimal visibility of all model contours and preparation margins due to the opaque gray color of the models.

    Suitable for processing in DLP 3D printers with a wavelength from 385 nm to 405 nm.

    Easy and error-free to process – high physical stability minimizes sedimentation during storage and facilitates mixing.