Voorbereiding
-
Thermoplas. Discs Hard...
€ 28,50Thermovormbare harde ronde schijven (25 eenheden)
Thermoplastische ronde schijven en vierkante platen zijn gemaakt van PET G, een ideaal thermovormmateriaal voor de productie van esthetische fixatie- en uitlijnhulpmiddelen voor nabehandeling.
Kenmerken van de fixeer- en uitlijnschijven :
Optische transparantie
Hoge biomechanische efficiëntie
Gemaakt van PETG.
Diameter: 120 mm.
Dikte: 0,5 mm.
Inhoud: 25 eenheden -
Perfect Bleach 16% 3X2.4 Ml...
€ 56,00Perfect Bleach 16% Whitening system with 16% carbamide peroxide IndicationsGentle and permanent tooth whitening for vital and non-vital teeth e.g. in cases of staining due to medication, fluorosis, food, trauma, ageing etc.Advantages16% carbamide peroxide for a fast whitening successWith potassium and fluoride against hypersensitivityAlso available as patientkitFurther advantages: see Perfect Bleach 10%
-
Erkoform 3D+ Erkodent 188600
€ 2.103,85Order no.188500Description (name)ERKOFORM-3dadditional infoContents1Unit of contentspieceMedical device infono medical deviceCE-labeling infoitem is labeled CEHazardous material infoitem is not hazardousCountry of originorigin of item is the EUApplication fieldFor all dental thermoforming.UsageAs a short instruction the touchpanel leads you through the thermoforming process and urges you to take necessary steps. All ERKODENT thermoforming materials are covered in the software. Just choose the desired material and thickness from the touchpanel and press on start. If you wish, for special applications you can modify the shown heating and cooling down times without modifying the standards. The display always gives information about what is happening and how much time is remaining for the actual step. If you do not execute the next step, for safety reasons the machine switches off after 10 sec. It is easy to add new thermoforming materials to the software.Product-descriptionVacuum thermoforming unit with touchless temperature control, reserve vacuum and touch panel. No compressed air supply is required - just plug and play. No preheating time. Sudden vacuum, built up before thermoforming process (Pat. 19511064). More space for higher models. Perpendicular prestretching and forming produces results of even foil thicknesses. Completely accessible model during the heating process. Handy one-hand foil fixation for foil thicknesses ranging from 0 to 5 mm. The Occluform-3 can be installed (accessory).
-
Brossette Crin Cheval...
€ 1,20ASTRO 9 114
Filling
Material : Horse Hair
Color : Black
Nature : Hard
Brush
Diameter Ø : 22 mm
Trim Length (TL) : 6,1 mm
Shank Ø : 2,35 mm
Rec.
Revolutions : 10.000 rpm
Core
Diameter Ø : 10 mm
Material : Metall
Application
Field : Dental -
Erkoform-3d motion Erkodent...
€ 2.399,95The Erkoform-3d+ has the same characteristics as the Erkoform-3dmotion but without automated thermoforming process. Also the touchpanel functions are the same. A large volume reserve vacuum is being held to allow a sudden forming. A sensor for touchless temperature measurement ensures the accurate temperature of the material for the thermoforming regardless of the ambient temperature. The unit is equipped with a medium-wave infrared heating, which doesn’t need preheating time. The medium-wave allows for the materials to heat up not only on the surface but also in-depth. The result is a less stressed splint. The Occluform-3 can be installed (accessory).
-
Digiscan Spray 300Ml Yeti...
€ 49,60Digiscan-Spray
Digiscan-Spray is een essentieel onderdeel voor dagelijks gebruik in het laboratorium. De ultradunne sprayfilm vergemakkelijkt de verwerking na het scannen. Digiscan-Spray kan worden aangebracht op siliconen, gips of metaal.
De spray van 300 ml is zeer betaalbaar.
Spuitafstand: 30 cm
elimineert reflecties op oppervlakken en voorkomt interferentie
ultrafijne spray
kan meerdere keren worden aangebracht
fijnere, gladdere oppervlakken
aanzienlijk betere scanresultaten
gemakkelijk te verwijderen zonder resten achter te laten -
-
Ca 37 normal set 500 gr Cavex
€ 16,53Cavex CA37 Fast Set
Features :
- worldwide reference
- firm consistency
- more rigid impression
- good tear and deformation resistance
- detail reproduction at least 50µm
- dust free
- pink peppermint aroma
- compatible with all types of gypsum, smooth gypsum surface
- patient friendly setting times in mouth
Normal Set 1.30 minutes
Fast Set 1 minute -
Ca 37 normal set 20 x 500...
€ 298,30Cavex CA37 Normal Set
20 x 500 gr
Features :
- worldwide reference
- firm consistency
- more rigid impression
- good tear and deformation resistance
- detail reproduction at least 50µm
- dust free
- pink peppermint aroma
- compatible with all types of gypsum, smooth gypsum surface
- patient friendly setting times in mouth
Normal Set 1.30 minutes
Fast Set 1 minute -
Ca 37 Fast set 20 x 500 gr...
€ 298,30Cavex CA37 Fast Set
20 x 500 gr
Features :
- worldwide reference
- firm consistency
- more rigid impression
- good tear and deformation resistance
- detail reproduction at least 50µm
- dust free
- pink peppermint aroma
- compatible with all types of gypsum, smooth gypsum surface
- patient friendly setting times in mouth
Normal Set 1.30 minutes
Fast Set 1 minute -
Lepelplaten Plastische...
€ 95,70Cavex Baseplates and Individual Trays
Gray shellac dental plates for the fabrication of individual trays for functional impression taking.
Indications :
- to make individual trays for functional impression taking
Features
- after slight heating the plate can be modelled into required shape
- simple technique
- strong and dimensionally stable tray
- no distortion at mouth temperature
- including metal handles -
Base Plate Double Cavex...
€ 71,50Shellac baseplates in pink colour. The intermediate in making prosthesis.
Also available in mica free.
Indications
- Intermediate for making prosthesis.
Features
- simple technique: can be easily softened with a flame and modelled to the desired shape
- strong and dimensional stable
- standardized thickness
- no distortion at mouth temperature
- economical
- available in uppers, lowers, plain and pink
- also available in double thickness upper
-
Base Plate Cavex Rose 100...
€ 66,70Shellac baseplates in pink colour. The intermediate in making prosthesis.
Also available in mica free.
Indications
- Intermediate for making prosthesis.
Features
- simple technique: can be easily softened with a flame and modelled to the desired shape
- strong and dimensional stable
- standardized thickness
- no distortion at mouth temperature
- economical
- available in uppers, lowers, plain and pink
- also available in double thickness upper
-
Lepelplaten Grijs...
€ 96,30Cavex Baseplates and Individual Trays
Gray shellac dental plates for the fabrication of individual trays for functional impression taking.
Indications :
- to make individual trays for functional impression taking
Features
- after slight heating the plate can be modelled into required shape
- simple technique
- strong and dimensionally stable tray
- no distortion at mouth temperature
- including metal handles -
Base Plate Cavex Rose 100...
€ 66,70Shellac baseplates in pink colour. The intermediate in making prosthesis.
Also available in mica free.
Indications
- Intermediate for making prosthesis.
Features
- simple technique: can be easily softened with a flame and modelled to the desired shape
- strong and dimensional stable
- standardized thickness
- no distortion at mouth temperature
- economical
- available in uppers, lowers, plain and pink
- also available in double thickness upper
-
Impresafe 1000 Ml Cavex Ha050
€ 77,93Cavex ImpreSafe
Fastsafe, non-toxic and very effective impression disinfectant.
Only three minutes needed to kill bacteria, fungi and viruses.
The system includes a disinfection container, one litre of disinfection concentrate and a digital timer.
Container dimensions: 30.9 x 15.4 x 9.9 cm (l x w x h).
Indications
disinfectant for alginate, polyether and silicone impressionsFeaturesonly 3 minutes to kill bacteria, fungi and virusesno negative influence on the impression surfacehighly concentrated thus saving storage spaceone litre of Cavex ImpreSafe equals 33 litres ready-to-use disinfection fluidaldehyde free and has a neutral smellavailable as a complete system for the dental practicecomplies with DGHM guidelines and EN 1040, EN 1275, EN 13727, EN 13624, EN 14561 and EN 14562
independent laboratory testing proofs Cavex ImpreSafe to be highly reliable and efficient...
https://youtu.be/Ww3W62w4hys -
Cavex Impresafe Starterkit...
€ 86,50Cavex ImpreSafe
Fastsafe, non-toxic and very effective impression disinfectant.
Only three minutes needed to kill bacteria, fungi and viruses.
The system includes a disinfection container, one litre of disinfection concentrate and a digital timer.
Container dimensions: 30.9 x 15.4 x 9.9 cm (l x w x h).
Indications
disinfectant for alginate, polyether and silicone impressionsFeaturesonly 3 minutes to kill bacteria, fungi and virusesno negative influence on the impression surfacehighly concentrated thus saving storage spaceone litre of Cavex ImpreSafe equals 33 litres ready-to-use disinfection fluidaldehyde free and has a neutral smellavailable as a complete system for the dental practicecomplies with DGHM guidelines and EN 1040, EN 1275, EN 13727, EN 13624, EN 14561 and EN 14562
independent laboratory testing proofs Cavex ImpreSafe to be highly reliable -
-
-
Cavex Bite & White...
€ 39,90Productkenmerken
• Perfect vloeigedrag door unieke viscositeit, voorkomt irritatie
• 16% carbamide peroxide, effectief en veilig
• Geschikt voor extrinsieke en intrinsieke verkleuring
• Natriumfluoride voor re-mineralisatie
• Kaliumnitraat ter voorkoming van gevoeligheid
• Frisse mint smaak -
Castogel 6 Kg Bego 52052
€ 125,90Precise and safe duplicating. For demanding model casting and combination works as well as for the resin casting technique. High elasticity and firmness. Repeatedly reusable
-
-
Wasbeetwallen Roze Zacht 96...
€ 47,97Geheel gemaakt van roestvrij staal.Het polymeriseert wanten met de flens 9 030 390Polymériseuse de M-9 is voorzien van een processor die de temperatuur verandert na een vastgesteld programma.Met de controller M-9 De operator (gebruiker) kan kiezen voor de gegevensvolgende:a) Een wachttijd vertraging in uren en minuten 0.00 tot 99 uur en 59 minuten.Deze keer kunt u een uitgestelde start te programmeren, zodat het programma begint met de uitvoering op een bepaald tijdstip. Deze tijd wordt uitgevoerd wanneer het programma gestart.b) De duur van elke gereguleerde temperatuurstijging in uren en minuten 0.00 tot 99 uur en 59 minuten.c) De tijd die gewenst in uren en minuten 0,00 tot 99 uur en 59 minuten elk van de platen.WAARSCHUWING behandeling aan het einde- In geval van alarm, een zoemer afgaat. Druk op een willekeurige toets (alarm bevestiging) om het programma voort te zetten.- In geval van stroomuitval, omdat de controller slaat alle gegevens, het programma verder vanaf het punt waar hij gestopt was.- Programma's en instellingen voor onbepaalde tijd worden bewaard, zelfs nadat de controller afsluitingen.Uiterlijke kenmerken en maatregelen: Hoogte: 480 mmBreedte: 20 mmOnder: 480 mmGewicht: 15 kgVoedingsspanning: 230 V, 50/60 HzVerbruik: 1750 WBinnenmaten: Hoogte: 335 mmBreedte: 180 mmOnder: 350 mm
-
Wasbeetwallen Geel Extra...
€ 47,97Articulatie was geel 1 kg
De samenstelling van de was biedt uitstekende maatvastheid en hoge precisie van de beetregistratie.
Verkrijgbaar in 4 hardheid:Geel: Extra zacht
Rose: Zacht
Rood: Normaal
Blauw: Hard -
Wasbeetwallen Rood normaal...
€ 48,96Articulatie was rood 1 kg
De samenstelling van de was biedt uitstekende maatvastheid en hoge precisie van de beetregistratie.
Verkrijgbaar in 4 hardheid:Geel: Extra zacht
Rose: Zacht
Rood: Normaal
Blauw: Hard -
Ormamax M Regular 150Ml...
€ 16,00Polysiloxane based, condensation-curing material for precision impressions. Medium consistency (medium bodied).
Ormamax Regular specific formulation guarantees an easy intraoral product flowing.
Ormamax Regular consistency ensures a perfect reproduction of fine details in every clinical condition.
Ormamax Regular is the ideal product when employed to realize functional impressions or to obtain accurate reproductions when combined with Ormadent Putty, in the “two-stage putty/wash technique”. -
Ormamax Light 150Ml Major...
€ 16,00Polysiloxane based, condensation-curing material for precision impressions. Light consistency (light bodied).
Ormamax Light specific formulation guarantees an easy intraoral product flowing.
Ormamax Light consistency ensures a perfect reproduction of fine details in every clinical condition.
Ormamax Light is the ideal product when employed to realize functional impressions or to obtain accurate reproductions when combined with Ormadent Putty, in the “two-stage putty/wash technique”.
Ormamax Light -
Alginmajor 450 Grs Major A1000
€ 9,16ALGINMAJOR - THE CLASSIC ONE
High precision alginate for impressions.
The excellent dimensional stability allows casting of the impressions after 5 days (if correctly stored in sealed container). Alginmajor exceeds ISO 1563 requirements.MAIN FEATURES:
Taste: Fruits.
Color: Orange.
Stabilized hypoallergenic formula.
Snap setting.
Lead and cadmium free.
Excellent biocompatibility.
Dust free powder for safe working and cleaning ease.
Fast wetting time to obtain smooth and plastic consistency for easy mixing.
Excellent gypsum compatibility.
Very high compressive strength and recovery from deformation, exceeding ISO requirements.
Sale formats
A1000 Alginmajor 1 x 453 g
A1004 Alginmajor 4 x 453 g
A1024 Alginmajor 24 x 453 g
TECHNICAL DATA
Technical Standard:
ISO 1563
Mixing Time:
35"
Working Time (a 23°C):
1' 20"
Setting Time (a 23°C):
2' 00"
Recovery from deformation:
96,2%
Shelf Life:
6 years
Pour-up Time:
5 days
Sale format (bag):
453 g -
Ormalab 85 5Kg + 2...
€ 73,64A polysiloxane based, condensation type material, exclusively designed for extra-oral use in the dental laboratory. Ormalab 75 is indispensable whenever high quality performances are required.MAIN FEATURES: Perfect compatibility with cold-curing acrylic resins.High precision in details reproduction.Long lasting dimensional stability.Very high compressive strength and recovery from deformation.Sale formatsM7500 Ormalab 75 1,6kg (900 ml)M7510 Ormalab 75 5kgM7520 Ormalab 75 5kg + 2 Ormactivator 60 mlTECHNICAL DATAMixing Time:30"Working Time (at 23°C):2' 00"Setting Time (at 23°C):4' 30"Final hardness (after 24 h):75 (±3) Shore AShelf Life:2 years INTENDED USE:Matrices for fixed and total prosthesis.Prosthesis repairs.Matrices for temporary crowns and bridges.