Productkenmerken
• Perfect vloeigedrag door unieke viscositeit, voorkomt irritatie
• 16% carbamide peroxide, effectief en veilig
• Geschikt voor extrinsieke en intrinsieke verkleuring
• Natriumfluoride voor re-mineralisatie
• Kaliumnitraat ter voorkoming van gevoeligheid
• Frisse mint smaak

Vertex Self-Curing Indications:Repair of full and partial dentures Relining of full and partial dentures Extensions to dentures Description:Vertex™ Self-Curing is self polymerizing and is suitable both for repair and relining of full and partial dentures, made by heat-curing acrylics like Rapid Simplified and Regular. Also suitable for extensions to dentures. This acrylic can be polymerized in 10 minutes using a pressure vessel. Technical specifications:Dough time8 minutesWorking time5 minutesCuring time10 minutes at 55°C and 2.5 barMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (monomer)1.7 g powder (polymer)Impact-resistance8.2 kJ/m2Flexural strength68 MPaFlexural modulus2028 MPaWater sorption20.3 µg/mm3Solubility1.8 µg/mm3 Shades:* 1 (pale pink)* 2 (pink opaque)* 3 (translucent pink)* 4 (clear)* 5 (pink, veined)* 6 (dark pink, veined)* 7 (blue-pink, veined)* 8 (blue-pink)* 10 (translucent pink, veined)* 14 (brown-pink, veined)

Preformed transparent pink impression trays / base plates, light-curing
Gingiva shade
Simple and time-saving shaping by hand
Permanent stability and compressive strength
Pleasant mint flavour Non-sticky consistency
Light-cured with standard halogen light or UVA lights

Description:Rapid Simplified is a heat-curing denture base material and forms a solid base for full and partial dentures. The pressing technique is the processing method for Rapid Simplified. This cadmium-free acrylic has a rapid 20 minutes polymerisation cycle (also overnight polymerisation is possible). Flask to be put in boiling water. Authentic pressing technique course is educated at the Vertex™ Dental Academy by using Vertex™ Rapid Simplified.Technical specifications:Dough time15 minutesWorking time30 minutesCuring time20 minutes at 100°CMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (monomer) 2.3 g powder (polymer)Impact-resistance11.3 kJ/m2Flexural strength85.2 MPaFlexural modulus2367 MPaWater sorption22.5 µg/mm3Solubility0.11 µg/mm3Shades:* 1 (pale pink)* 2 (pink opaque)* 3 (translucent pink)* 4 (clear)* 5 (pink, veined)* 6 (dark pink, veined)* 7 (blue-pink, veined)* 8 (blue-pink)* 10 (translucent pink, veined)* 14 (brown-pink, veined)

Anutex modelling wax sheets are used by the technician to create the preliminary denture base for the dentist to try in the patients mouth.

Dental modelling wax

For Full/Partial Impressions or Copper Bands/Tracing Impression Compound is a thermoplastic impression material available in cakes – for full or partial impressions – and sticks – for copper band impressions and for adding to the periphery of an impression tray. Each coloured variant has a controlled working temperature.

Type 4 extra hard resin reinforced dental die stone for fixed prosthesis and implantology

Advantages

• The resin particles inside the formulation provide high elasticity and splintering resistance for optimal chamfering
• The resin particles reduce water absorption guaranteeing the accuracy of the model
• Operator safety due to a formaldehyde free formula
• All elite master colours are optimised for detection by all modern laser and optical scanners
• Low expansion, even after 48 hours

Characteristics

• High mechanical characteristics
• Compact, marble-like finish
• Accurate reproduction of detail
• Available in three different colours: Desert Sand, Sandy Brown, Soft Grey

Zhermack recommends using:

• Gypstray, for removing stone residues
• Elite mix, its fully electronic management guarantees a constant mixing quality as well as a silent operation

C-siliconen laboratorium stopverf voor de verdubbeling van de prothese mallen, controle-matrix voor het ontwerp van metalen structuren, indrukken voor kopieer-prothese techniek, matrix voor het maken van een tijdelijke kroon / bruggen, matrix voor de reproductie van gingivale weefsel (bijvoorbeeld Zhermack gingifast), isolatie tanden / gips in kolf

voordelen
Hoge initiële vloeibaarheid
Goede eindhardheid
Hoge detailweergave
Geen vervorming in kolf. Goede breuksterkte
Hittebestendig 140 ° C
Hoge elastische weerstand
kenmerken
Te mengen met gel of vloeibare katalysator

Final hardheid 85 Shore A
Ongepigmenteerd