Home

Home

VarseoWax Model, gray 250 g - Bego 41141

Resin for solid or hollow 3D printing of dental full and partial models as well as models with removable dies.

Suitable for duplication with silicone or gel as well as for the fabrication of splints, aligners, etc. using the thermoforming technique.

Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time.

The dimensional stability and the smooth and pore-free surfaces of the printed models are the ideal basis for the fabrication of high-precision restorations.

Can be insulated against adhesive wax, is resistant to moisture in order to facilitate problem-free cleaning and accordingly, its handling during processing is comparable to that of a conventional plaster model.

Optimal visibility of all model contours and preparation margins due to the opaque gray color of the models.

Suitable for processing in DLP 3D printers with a wavelength from 385 nm to 405 nm.

Easy and error-free to process – high physical stability minimizes sedimentation during storage and facilitates mixing.

€ 59,00
Exclusief belasting
Aantal
Product available for orders

Voorraad

Resin for solid or hollow 3D printing of dental full and partial models as well as models with removable dies.

Suitable for duplication with silicone or gel as well as for the fabrication of splints, aligners, etc. using the thermoforming technique.

Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time.

The dimensional stability and the smooth and pore-free surfaces of the printed models are the ideal basis for the fabrication of high-precision restorations.

Can be insulated against adhesive wax, is resistant to moisture in order to facilitate problem-free cleaning and accordingly, its handling during processing is comparable to that of a conventional plaster model.

Optimal visibility of all model contours and preparation margins due to the opaque gray color of the models.

Suitable for processing in DLP 3D printers with a wavelength from 385 nm to 405 nm.

Easy and error-free to process – high physical stability minimizes sedimentation during storage and facilitates mixing.

27002750

Specifieke referenties

11 andere producten in dezelfde categorie: