Losse Prothese
-
Cobavest 1000Ml Yeti 941-1000
€ 19,08COBAVESTFosfaatgebonden, niet-grafiet, zeer nauwkeurige coating voor metaallijmencompatibel met siliconen en gelduplicatieuiterst nauwkeuriguitstekende weergave van detailsbijzonder fijne korrelgrootteuitstekende vloeibaarheidbakken: traditioneel / snel
-
Plastiform B1 10 Stk
€ 45,33Cavex Set Up Wax
The modelling wax of choice. The unique well balanced composition makes Cavex Set Up Wax easy to work with.
Indications
pink modelling wax for prosthetic dentistry (setting up teeth)
Features
composition based on a perfect combination of paraffin, microwax and bee's wax
the wax has a great tenacity
no distortion of the wax, due to small range (<5%) of melting points
ideal for partial prosthesis
no runniness or droplet formation
pink (similar to the mouth situation)
one sheet is enough for two prosthesis
size: 18.6 x 8.9 cm -
Cobavest Cr/Co 100X200Gr...
€ 122,73COBAVEST
Fosfaatgebonden, niet-grafiet, zeer nauwkeurige coating voor metalen adjuncten
-compatibel met silicone en gelduplicatie
-Uiterst nauwkeurig
-uitstekende detailweergave
-Bijzonder fijne korrelgrootte
-uitstekende vloeibaarheidBranden: traditioneel / snel
COBAVEST Poeder 20 kg (100 x 200 g) Ref.-nr. 940-0200
COBAVEST Vloeibaar 1000 ml Fles Ref.-nr. 941-1000 -
crochets boules 1.0 mm 100...
€ 61,86SCHEU-Anchor 1.0 mm - 100 Pcs
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
Clasps and Bars -
Vector 420, Ecarteur Sector...
€ 41,36VECTOR® 420 10 pcs. 2512
Sector expansion screw in stronger
version.
Light yellow directional arrow.
Expansion: 5,5 mm
B x H: 6.20 x 2.80 mm
Length: 13 mm -
Crochets Boule 0.9 Mm 100...
€ 61,86SCHEU-Anchor 0.9 mm 100 Pcs
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
Clasps and Bars. -
Crochets Boule 0.8 Mm 100...
€ 61,86SCHEU-Anchor 0.8 mm
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
Clasps and Bars -
Crochets Boule 0.7 Mm 100...
€ 61,86SCHEU-Anchor 0.7 mm
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Perfect elasticity and stability.
Clasps and Bars -
Vector 600 1 Stk 9 Mm Scheu...
€ 24,94Vector 600
Rapid Palatal Expander 10 pcs
Expension : 9 mm
10.40 x 4.00 x 13.00 mm -
Vector 620 1 Stk 11 Mm...
€ 24,94VECTOR® 620
Palatal expansion screw with anatomically bent retention arms that can be easily soldered or welded to molar bands. The specially designed housing fits the palatal vault perfectly. An integrated polyamid insert nut prevents the screw from backing-up. Laser marking for torsional direction and expansion, manufacturer as well as production batch acc. to Medical
Device Directive on housing.
1/10 pcs. 2526
Expansion:
11,0 mm
B x H:
10,4 x 4,0 mm
Length:
15 mm -
J Klammer 0.8 Mm 100 Stk...
€ 229,54SCHEU-Anchor and J-clasps (1017.2)
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface.
Ø 0,8 mm -
Vector 620 10 Stk 11 Mm...
€ 229,15VECTOR® 620
Palatal expansion screw with anatomically
bent retention arms that can be easily
soldered or welded to molar bands. The
specially designed housing fits the palatal
vault perfectly. An integrated polyamid
insert nut prevents the screw from
backing-up. Laser marking for torsional
direction and expansion, manufacturer as
well as production batch acc. to Medical
Device Directive on housing.
1/10 pcs. 2526
Expansion:
11,0 mm
B x H:
10,4 x 4,0 mm
Length:
15 mm -
Vector 400 11 Mm 10 Pcs...
€ 41,36VECTOR® 400 10/50 pcs. 2510
The skeletal sector expansion screw has
a graceful design, and is also suitable
for single tooth movement.
Light yellow directional arrow.
Expansion:
3,5 mm
B x H:
6,2 x 3,0 mm
Length:
11 mm -
Vector 600 10 Stk 9 Mm...
€ 229,15VECTOR® 600
Palatal expansion screw with anatomically bent retention arms that can be easily soldered or welded to molar bands. The specially designed housing fits the palatal vault perfectly. An integrated polyamid insert nut prevents the screw from backing-up. Laser marking for torsional direction and expansion, manufacturer as well as production batch acc. to Medical Device Directive on housing.
1/10 pcs. 2524
Expansion: 9,0 mm
B x H: 10,4 x 4,0 mm
Length : 13 mm -
Klammer J 1.0 Mm 100 Stk...
€ 229,54SCHEU-J-clasps 1.0 mm - 100 Pcs
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface. -
Klammer J 1.0 Mm 10 Stk...
€ 26,39SCHEU-J-clasps 1,0 mm - 10 Pcs
5 right + 5 left
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface. -
Klammer J 1.0 Mm 10 St...
€ 26,39SCHEU-J-clasps 1.0 mm - 10 Pcs
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface. -
Klammer J Oblique 1.0Mm 100...
€ 229,54SCHEU J-clasps 1.0 mm - 100 Pcs
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface. -
Klammer J 0.9Mm 10Stk Scheu...
€ 26,39SCHEU J-clasps 0.9 mm - 10 Pcs
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface. -
Klammer J 0.9Mm 10Stk Scheu...
€ 26,39Permanently soft, polyvinyl siloxane liner for direct and indirect use.
Biocompatible material. It doesn’t release monomer and heat.MAIN FEATURES:
Major Total Soft has fluid consistency, it is easy to apply and it prevents air voids being entrapped during the dispensing of the material.
Thanks to its high resilience and final softness, Major Total Soft is well tolerated by patients.
The silicone soft liner is a hydrophobic material and, combined with its relevant sealer, it avoids liquid absorption and protects the prosthesis from infiltrations.
Major Total Soft is monomer free.
Major Total Soft è biologically inactive.
The adhesive bonds the silicone soft liner to the denture acrylic reliably.
Major Total Soft is smooth and dimensionally stable.
Major Total Soft resists to the tensions exerted by masticatory loads.
Major Total Soft can be used directly by the dentist or it can be processed in a laboratory using standard reliners.
The material is fully odourless and it doesn't lose color.
Major Total Soft is supplied in a pale rose color suitable for every aesthetical need.
Sale formats
C3500 Major Total Soft - Standard Set
C3501 Major Total Soft - Refill Package
INTENDED USE:
Direct liner.
Therapeutical medium.
Indirect liner.
Temporary material.
Repairing material.
Stabilizing medium. -
Klammer J 0.8Mm 10Stk Scheu...
€ 26,39SCHEU J-clasps 0.8 mm 10 Pcs
5 right + 5 left
Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
stainless steel alloy; fabricated in a cutting and cold forming process.
One piece without any soldering connection with high polished surface. -
SheraCast 50x400gr Sq...
€ 100,00High precision laboratory A-Silicone putty material.
Use
- Duplication of denture moulds
- Ceramics technique printed on verticulator
- Die in full dentures
- Control matrix for the design of metal structures
- Denture repair
- Bite recording key for positioning in articulator
- Matrix for use in making temporary crowns/bridges
- Matrix support for the working of metal free aesthetic materials
- Insulation of teeth/plaster in muffle
Advantages
- Very high flowability
- Superior dimensional stability
- Heat resistance (over 200°C)
- Easy handling
- Excellent detail definition
- Can be milled
- Linear variation: -0.058% after 24 hours
- No deformation in flask
Characteristics
- 1:1 Mixing ratio
- Biocompatible
- Final hardness 95 Shore A
- Light blue colour
Warning: it is advisable not to use latex gloves.
-
Shera PORAL 1lt Shera 926401
€ 23,00Solvent free dipping hardener
- hardens and seals investment models
- very low viscosity
- it soaks very easily into the model's surface
- to be used without thinner -
SheraPlast Resine...
€ 67,00Light-curing modelling resin, ready for use
- for modelling of telescopic and conical crowns, milled elements and attachments,
inlays and onlays, modelled castings, individual implant abutments and bars
as well as crowns and bridges for the pantographic transfer
- very good fluidity while coupled with high stability
- burns without residues
- colour: red translucent -
Castapress 4000 gr Vertex n°7
€ 275,94Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear.
-
Orthoplast 250 ml 922 Clear...
€ 22,63Vertex OrthoplastIndications:Production of orthodontic appliances using the dough technique Production of orthodontic appliances using the spray-on techniqueDescription:Vertex™ Orthoplast is a self polymerizing acrylic for orthodontic appliances. Its unique grain structure makes this acrylic suitable for the spray-on technique. Vertex™ Orthoplast powder is available in clear. In addition, an extensive range of colours (18) incorporated in the liquid in 250ml bottles available.Technical specifications:Dough time9 minutesWorking time6 minutesCuring time20 minutes at 55°C and 2.5 barMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (monomer) 2.1 g powder (polymer)Flexural strength64 MPaFlexural modulus1985 MPaWater sorption19.5 µg/mm3Solubility0.8 µg/mm3Shades:901 (red)902 (yellow)903 (blue)904 (green)907 (purple)908 (turqoise)909 (white)910 (violet)912 (vblack)913 (magenta)914 (neon yellow)915 (neon green)916 (neon orange)917 (neon pink)921 (pink opaque)922 (clear)923 (pinktone)924 (extra clear)Packaging:150 g500 g1.000 g2.000 g4.000 g10.000 g25.000 g75 ml250 ml500 ml1.000 ml2.000 ml5.000 ml12.500 ml
-
Implacryl 250 ml Vertex
€ 20,95Vertex Implacryl
Hars voor volledige en gedeeltelijke implantaatprothesen
Vertex™ Implacryl is een extra-hardE-hars, ontwikkeld voor de vervaardiging van volledige en gedeeltelijke prothesen en in het bijzonder voor implantaatgedragen prothesen.
Technische kenmerken:
Mengtijd: 20 - 25 minuten
Werktijd: 5 tot 7 minuten
Droogtijd: Start bij 70° gedurende 90 minuten 30 minuten bij 100°C
Mengverhouding per volume / gewichtsdelen: 1 ml / 0,95 g vloeistof (monomeer) 2,1 g poeder (polymeer)
Slagvastheid: 2,8 kJ/m2
Buigsterkte: 77,1 MPa
Flexural modulus: 2330 MPa
Waterabsorptie: 24,3 µg/mm3
Oplosbaarheid in water: 0,14 µg/mm3
-
-
Castapress 4000 gr Vertex n°10
€ 275,94Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear.
-
Vertex Trayplast 1000 ml
€ 36,86Vertex Trayplast Indications:for construction custom-built impression trays Description:Vertex™ Trayplast is a self polymerizing acrylic for individual impression trays. This acrylic can be polymerized in 10 minutes using a pressure vessel. Technical specifications:Dough timemix in a silicone bowl until a dough is reachedWorking timeuse directlyCuring time10 minutes at 55°C and 2.5 barMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (monomer)4.2 g powder (polymer) Shades:* yellow* green* ivory* white* blue Packaging:500 g1.000 g2.000 g250 ml500 ml1.000 ml
-
Castaflask Cuvette pour...
€ 84,89De mixer van gelatine Mestra is roestvrij staal.De microprocessor biedt de drager een groot aantal mogelijkheden, bijvoorbeeld een schema voorgeprogrammeerde zodat de gelatine op temperatuur te betalen. Bijvoorbeeld moet H en 19,00 Wanneer het gewenst is dat de gelatine klaar te betalen H 8,00 geprogrammeerd 8 uur op bestelling.We kunnen ook gaan van de mengtemperatuur C-1 (95 ° C - 75 ° C) en onderhoudt C-2 (65 ° C - 35 ° C) of vice versa, simpelweg door een druk op de knop te drukken.De motor heeft een grote koppel reducer, die gemakkelijk kan worden gestart wanneer de tank vol is van gelatine in stukken.De mixer is voorzien van alle veiligheidsvoorzieningen C. E.:- De motor thermische relais.- Probe oververhitting.- Magnetron deur.- Fuse-generaal van de equipmen.METINGEN EN uiterlijke kenmerken: Hoogte: 500 mmBreedte: 320 mmLengte: 320 mmGewicht: 15 kgVoedingsspanning, met de aarde: 230 V, 50/60 HzGeschatte Consommatin: 700 WVelocidad r.p.m.. 70-50 Hz84-60 HzCapaciteit:. 6 l
-
Orthoplast 4000 gr 22 Clear...
€ 184,49Vertex OrthoplastIndications:Production of orthodontic appliances using the dough technique Production of orthodontic appliances using the spray-on techniqueDescription:Vertex™ Orthoplast is a self polymerizing acrylic for orthodontic appliances. Its unique grain structure makes this acrylic suitable for the spray-on technique. Vertex™ Orthoplast powder is available in clear. In addition, an extensive range of colours (18) incorporated in the liquid in 250ml bottles available.Technical specifications:Dough time9 minutesWorking time6 minutesCuring time20 minutes at 55°C and 2.5 barMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (monomer) 2.1 g powder (polymer)Flexural strength64 MPaFlexural modulus1985 MPaWater sorption19.5 µg/mm3Solubility0.8 µg/mm3