Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear.

Vertex Self-Curing Indications:Repair of full and partial dentures Relining of full and partial dentures Extensions to dentures Description:Vertex™ Self-Curing is self polymerizing and is suitable both for repair and relining of full and partial dentures, made by heat-curing acrylics like Rapid Simplified and Regular. Also suitable for extensions to dentures. This acrylic can be polymerized in 10 minutes using a pressure vessel. Technical specifications:Dough time8 minutesWorking time5 minutesCuring time10 minutes at 55°C and 2.5 barMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (monomer)1.7 g powder (polymer)Impact-resistance8.2 kJ/m2Flexural strength68 MPaFlexural modulus2028 MPaWater sorption20.3 µg/mm3Solubility1.8 µg/mm3 Shades:* 1 (pale pink)* 2 (pink opaque)* 3 (translucent pink)* 4 (clear)* 5 (pink, veined)* 6 (dark pink, veined)* 7 (blue-pink, veined)* 8 (blue-pink)* 10 (translucent pink, veined)* 14 (brown-pink, veined)

2-punts functionele articulator

Gemaakt van messing en roestvrij staal.

Zijdelingse bewegingen.

ASA 5050 - Articulator Rood Non-Arcon

For Full/Partial Impressions or Copper Bands/Tracing Impression Compound is a thermoplastic impression material available in cakes – for full or partial impressions – and sticks – for copper band impressions and for adding to the periphery of an impression tray. Each coloured variant has a controlled working temperature.

Melting points 630°C - 680 °C
Sticks with incorporated flux 150 mm

3D printing UV Resin
405 nm

- Shake well before use.
- Wear gloves and mask before use, avoid direct skin contact.
- Wash with plenty of fresh water if there is any accidently skin.
- Do not orally, keep away from children.
- The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
- Using temperatue : 25 - 30° C

Anutex modelling wax sheets are used by the technician to create the preliminary denture base for the dentist to try in the patients mouth.