Modelharsen

3D printing UV Resin
405 nm

- Shake well before use.
- Wear gloves and mask before use, avoid direct skin contact.
- Wash with plenty of fresh water if there is any accidently skin.
- Do not orally, keep away from children.
- The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
- Using temperatue : 25 - 30° C

3D printing UV Resin
405 nm

- Shake well before use.
- Wear gloves and mask before use, avoid direct skin contact.
- Wash with plenty of fresh water if there is any accidently skin.
- Do not orally, keep away from children.
- The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
- Using temperatue : 25 - 30° C

Voor 3D printen van zeer nauwkeurige prothetische en orthodontische modellen

VarseoWax CAD/Cast

The resin for 3D printing of burn-out CAD/Cast partial denture frames and press-to-metal templates

Can be burned out without leaving any residue – provides optimal conditions for pore-free, smooth and precise partial dentures

Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time

Further processing with the investment materials VarseoVest P plus and VarseoVest C&B, specially developed for shock-heat investing of 3D printed objects possible

Excellent dimensional stability of the printed objects enables deformation-free investment and thus an excellent accuracy of fit of the casted objects

Printed plastic boasts first-class green strength, so that no lightcuring is necessary if frames are processed immediately – results in unparalleled process time savings

Technical specifications

Color yellow
Modulus of elasticity = 1,500 MPa
Viscosity 600 – 900 mPa*s
Shore hardness D 79 – 83 D
Density at 22 °C 1.08 g/cm³
Thermal stability at 55 °C 1.8 MPa
Flexural strength = 50 MPa
Residual ash content = 0.1 % bei 700 °C
Wavelength 405 nm

Resin for solid or hollow 3D printing of dental full and partial models as well as models with removable dies.

Suitable for duplication with silicone or gel as well as for the fabrication of splints, aligners, etc. using the thermoforming technique.

Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time.

The dimensional stability and the smooth and pore-free surfaces of the printed models are the ideal basis for the fabrication of high-precision restorations.

Can be insulated against adhesive wax, is resistant to moisture in order to facilitate problem-free cleaning and accordingly, its handling during processing is comparable to that of a conventional plaster model.

Optimal visibility of all model contours and preparation margins due to the opaque gray color of the models.

Suitable for processing in DLP 3D printers with a wavelength from 385 nm to 405 nm.

Easy and error-free to process – high physical stability minimizes sedimentation during storage and facilitates mixing.