D
-
-
-
-
Sandblaster 2 Chambers...
1,196.32 -21% 945.092 chambers Ref. R-080262
3 chambers Ref. R-080263
4 chambers Ref. R-080264
The Constellation family comprises a range of modular sandblasters that are able to adapt to the needs of most professionals. Their models have 2, 3 and 4 sand chambers so this machine is a very versatile tool in Dental Lab.
The main characteristics of the “Constellation” Sandblasters are the following:
- Stainless Steel Chassis AISI 304 with a broad glass window.
- Blowing gun inside the chamber, very useful when cleaning.
- Lighting system with fluorescent lamp.
- Modular system, so it can be extended in the future.
- Chamber changing valve inside the chamber.
- Relief valve that stops air flow when the pedal is released, so sand is saved.
- Ergonomic pedal connected to the machine by flexible tube.DIMENSIONS: Height: 280 mm Lenght: 390 mm (2 vasos)
510 mm (3-4 vasos)Widht: 440 mm Weight: 12,5 - 14 - 15,5 kg Operating pressure: 2 - 5 atmospheres Max. air consumption: 80 l/min Tension: 230 V, 50/60 Hz Cosumption: 20 W -
-
-
-
Shield For Polisher Mestra...
118.99 -21% 94.00Totally made of rubber preventing any workpiece breakage due to collision with the guard. -
-
Spot Welder Mestra 100127
741.89 -21% 586.09
R-100127 SPOT WELDING MACHINE
Ref.: 100127
Its small size means it can installed anywhere. It has a full set of exchangeable electrodes, making it easy to find the best way to adapt to the job in question.The machine is controlled electronically, which practically eliminates sparks between electrodes on machines without a control system of this type. Power can be selected from among 30 different levels to adapt to the thickness of the material to be welded.
The machine is supplied with an accessory for the heating up of wire arcs, and two flexible cables to perform manual welds.
TECHNICAL CHARACTERISTICS:
Height: 160 mm
Length: 335 mm
Width: 220 mm
Weight: 5,5 kg
Power supply: 220 V, 50/60 Hz
Rated power: 600 W
Earthing plug -
-
-
-
-
-
Taille Platre Mulhacen...
1,371.01 -21% 1,083.10The new RH3 meets even the most stringent requirements of dental technicians in roughing out hard and soft plaster models. - POWERFUL:
- 1.1 Hp. motor for constant cutting power without fatigue
- EFFICIENT:
- 3000 rpm motor for effortless cutting
- STABLE:
- Weighting over 21 kg, on non-slip feet
- QUIET:
- Counterweighted disc prevents vibration and hum
- ERGONOMIC:
- Easy-to-clean, rounded casing. Large, fold-down table. Large window (120 mm). No obstacles for model movement. Front-mounted water flow adjustment tap
- SAFE:
- Protected against unexpected restarts after power cuts. Cutting disc mounted on metal plate to prevent breakage due to wear
- HIGH-QUALITY:
- Faired, maintenance-free motor. Made of electrostatically painted aluminium & stainless steel
- ECONOMICAL:
- Minimal water consumption (no more than 9 l/h).
CHARACTERISTICS: RH-3 Monophasic motor: 1,1 Hp Rated power: 1200 W R.P.M.: 3000 Tension: 230 V, 50/60 Hz Height: 345 mm Width: 310 mm Lenght: 450 mm Weight: 21 kg -
Taille Platre Mulhacen...
897.59 -21% 709.10The new RH3 meets even the most stringent requirements of dental technicians in roughing out hard and soft plaster models. - POWERFUL:
- 1.1 Hp. motor for constant cutting power without fatigue
- EFFICIENT:
- 3000 rpm motor for effortless cutting
- STABLE:
- Weighting over 21 kg, on non-slip feet
- QUIET:
- Counterweighted disc prevents vibration and hum
- ERGONOMIC:
- Easy-to-clean, rounded casing. Large, fold-down table. Large window (120 mm). No obstacles for model movement. Front-mounted water flow adjustment tap
- SAFE:
- Protected against unexpected restarts after power cuts. Cutting disc mounted on metal plate to prevent breakage due to wear
- HIGH-QUALITY:
- Faired, maintenance-free motor. Made of electrostatically painted aluminium & stainless steel
- ECONOMICAL:
- Minimal water consumption (no more than 9 l/h).
CHARACTERISTICS: RH-3 Monophasic motor: 1,1 Hp Rated power: 1200 W R.P.M.: 3000 Tension: 230 V, 50/60 Hz Height: 345 mm Width: 310 mm Lenght: 450 mm Weight: 21 kg -
-
Turbine Airturbo + Eau...
1,150.12Air turbine for precise works
Simple and easy control function and precise - hight speed revolution
320.000 rpm
Easy to controle of water rate and air presure
Simply chuck*handle system
Less noise and vibration
Handpiece : 85,5 g.
Controle box : 1,700 g
Water supply bottel capacity : 170 ml
Air consumption : 40L/min -
-
Ultimate 500XL-D Torque NSK
1,653.14 -16% 1,388.64Digitale toerentalweergave
instellen onderhoudsmodus
Automatische snelheidsfunctie
Foutcodeweergave functie
Mogelijkheid om een turbine aan te sluiten -
-
Ultimate 500XL-K Torque NSK
1,654.97 -16% 1,390.17Digitale toerentalweergave
instellen onderhoudsmodus
Automatische snelheidsfunctie
Foutcodeweergave functie
Mogelijkheid om een turbine aan te sluiten -
Ultrasonic Cleaner...
1,422.90 -21% 1,124.09The "Calypso" model is a last generation Ultrasonic Cleaner that includes the latest innovations: Sandwich type transducers, with 100 W real power transmitted to the tank; working frequency of 40 kHz, representing an optimum compromise between sonority and cleaning power; electronic time control run by microprocessor, with digital display and warning acoustic signals; automatic heating system of cleaning liquid; high density polyurethane body, chemical agent resistant material; tank of 4 litre capacity and waste pipe; etc. All these characteristics are complemented by an attractive line of careful design.
The machine is supplied with the following accessories:
- A stainless steel basket for equipment cleaning.
- A stainless steel lid, that eliminates noise while working and avoids dirt coming into the cleaner.
- A glass for cleaning of little instruments and its support.
- MESTRA Bur-cleaner tweezers R-070520.CHARACTERISTICS: Height: 220 mm Width: 425 mm Depth: 270 mm Weight: 4,5 kg Tank capacity: 4 l Voltage: 230 V, 50/60 Hz Transducer power: 100 W Frecuency: 40 kHz -
