CC

HIGH SCANNING PERFORMANCE
Be it a single preparation, a full arch gypsum model or a triple-tray impression, the 7DS efficiently captures clinical data. It scans preparations with excellent marginal integrity, providing precise fit for a wide variety of dental indications. Specifically for Screw Retained Bars and Bridges (SRBB), we have developed a certified scanning workflow.

The scanning performance of the 7DS is the result of a combination of years of mechanical engineering experience with state-of-the-art technology components. The optical set-up, running with five axes of freedom and two high-speed cameras, gives access to a superior scanning volume (140 mm x 140 mm x 140 mm) with a high degree of accuracy. The scan chamber is large enough for fully articulated models.

DESIGN-READY FOR SEVERAL DENTAL INDICATIONS
The 7DS is ready for receiving digital impressions from clinics and for complete in-lab digital workflow. As it includes a versatile DWOS software package, it enables the dental technician to design crowns & bridges, partial frameworks, screw-retained bars & bridges, implant abutments, and more. Virtual models can be generated from impression scans and output for fabrication.

THE 7DS HIGHLIGHTS :
High precision scanning of both models and impressions
On-board computer with 64-bit processor
High productivity through automatic scan and design wizards
High capacity scan and design for dies: 30 copings in 15 minutes
Easy clinic-to-lab or lab-to-outsourcing communication with DWOS Connect
SAM® SE articulator included
Certified scan workflow for screw-retained bars & bridges (optional)
Certified by 3M ESPE, Straumann and Dentsply Implants

With Easy 5 you will get a five-axis dry milling machine for an especially wide range of indications. The B axis with an extraordinary great rotation range of up to ±? 35 degrees and the fixing device for blanks with a thickness of up to 40 mm make sure that you can realize nearly any object that can be dry milled.

Powder (polymer)
Cold cured acrylic resin permits the simple and economical fabrication of orthodontic appliances.
Especially suited for the spray-on (salt-and-pepper) technique.
Also, very suitable for the doughing technique.

Order no.188500Description (name)ERKOFORM-3dadditional infoContents1Unit of contentspieceMedical device infono medical deviceCE-labeling infoitem is labeled CEHazardous material infoitem is not hazardousCountry of originorigin of item is the EUApplication fieldFor all dental thermoforming.UsageAs a short instruction the touchpanel leads you through the thermoforming process and urges you to take necessary steps. All ERKODENT thermoforming materials are covered in the software. Just choose the desired material and thickness from the touchpanel and press on start. If you wish, for special applications you can modify the shown heating and cooling down times without modifying the standards. The display always gives information about what is happening and how much time is remaining for the actual step. If you do not execute the next step, for safety reasons the machine switches off after 10 sec. It is easy to add new thermoforming materials to the software.Product-descriptionVacuum thermoforming unit with touchless temperature control, reserve vacuum and touch panel. No compressed air supply is required - just plug and play. No preheating time. Sudden vacuum, built up before thermoforming process (Pat. 19511064). More space for higher models. Perpendicular prestretching and forming produces results of even foil thicknesses. Completely accessible model during the heating process. Handy one-hand foil fixation for foil thicknesses ranging from 0 to 5 mm. The Occluform-3 can be installed (accessory).

Premium+ is a wet grinding machine for glass ceramics and composites which has been newly developed from scratch. Its highest precision and the quick drive units, are combined here with a closed liquid cooling system in an extremely compact housing. So you will get first-class grinding results in shortest time with the Premium+ Impression.

Versatile dental milling machines.

Pro-Expert 5 have five simultaneously working axes and are designed for dry machining as well as for wet machining. The second rotary axis (B axis) with a rotation range of up to ± 30 degrees enables you to mill undercuts.
Not just for dry machining: Pro-Expert 5 are prepared for connecting the wet grinding module

Premium+ is a wet grinding machine for glass ceramics and composites which has been newly developed from scratch. Its highest precision and the quick drive units, are combined here with a closed liquid cooling system in an extremely compact housing. So you will get first-class grinding results in shortest time with the Premium+ Impression.

Powder (polymer)
Cold cured acrylic resin permits the simple and economical fabrication of orthodontic appliances.
Especially suited for the spray-on (salt-and-pepper) technique.
Also, very suitable for the doughing technique.