D

CLAMP 2 Flasks For Press

This useful clamp can save a great deal of time.
It is put into the press with the flask inside.
They are removed after pressing and lateral nut approach. It can be used for one or two flasks.
This clamp for presses is made of special hardened and treated aluminum for greater consistency and recovery, and longer life than iron clamps.
The use of stainless steel screws, nuts and washers makes the assembly rust-proof and reduces its weight by half.

Height : 145 mm
Width : 115 mm
Weight : 1,5 Kg

CLAMP For Press

This useful clamp can save a great deal of time.
It is put into the press with the flask inside.
They are removed after pressing and lateral nut approach. It can be used for one or two flasks.
This clamp for presses is made of special hardened and treated aluminum for greater consistency and recovery, and longer life than iron clamps.
The use of stainless steel screws, nuts and washers makes the assembly rust-proof and reduces its weight by half.

Height : 215 mm
Width : 115 mm
Weight : 1,5 Kg

Nobody questions the nedd and importance of steam jet cleaning in the dental lab. Nobody questions its consequences either: dirt in sinks, air moisture, condensation in walls and floors… And all this leaving aside the high price these kind of devices used to have up to now.
In MESTRA® we have worked hard to make these troubles simply disappear by using the Altamira Steam Cleaning Cabin, the indispensable complement for any steam cleaning device.

> The device features a deflecting frame carefully studied for the steam to remain inside the chamber, with no leaks.
> Lighting is another of the most carefully studied aspects of the Altamira Steam Cleaning Cabin: Two powerful low-energy bulbs give a perfect lighting to the piece steamed.
> The primary filter is located inside the main chamber, so it is easily accesible. No tools are required to clean or replace the filter.
> The second filter is located at the rear of the device, and it rerequires even less maintenance than the former.
> A practical sight-level glass shows when the tank is full, so you can empty it via a comfortable hose located at the rear of the device.
> The heart of the Steam Cleaning cabin is a powerful high-flow fan, which easily aspirate the steam accumulated inside the main chamber. It is powerful and silent.

520 x 490 x h 570 mm
24 Kg
230V - 140 W

For ceramics & metalsHP Sintered Diamonds burs with metallic binder (ISO 807.104) The Solid Sintered Diamond burs (SSD) are superior in grinding power & longevitycompared to standard sintered diamond instruments. The worldwide program inshapes and grits covers all needs for grinding metals and ceramics. Grit TypeISO GritColour CodeApplicationSuper Fine503YellowCeramic & MetalFine513RedCeramic & MetalMedium523NoneCeramic & Metal & GoldMedium - Coarse532Light BlueCeramicMedium - Coarse533Dark - BlueMetalCoarse542GreenMetalSuper Coarse543BlackMetal

AC 600
Three-cylinder, twin-head compressor, with 2 air driers

2 three-phase motors 50 Hz – total 3 kW – 7.4 A.
Air tank 150 litres.
Produced air with delivery pressure at 5 real bar: 476 N l/min.
Sound pressure level 74 dB (A).
W= 1320 mm D= 590 mm H= 890 mm
Net Weight= 137 kg Gross Weight= 173 kg

easy Waxer

- short heating time
- wide temperature range up to 190°C/ 374°F
- easy handling due to temperature control

unbeatable price-performance ratio
energy-saving on/off switch

Incl.: handpiece, handpiece clamp

EASYCLEAN MD

Its characteristics are similar to those of the Square Electro Vibrator, except for its dimensions: 220 x 160 mm.

Its characteristics are similar to those of the Square Electro Vibrator, except for its dimensions: 220 x 160 mm.

Its characteristics are similar to those of the Square Electro Vibrator, except for its dimensions: 220 x 160 mm.

Order no.188500Description (name)ERKOFORM-3dadditional infoContents1Unit of contentspieceMedical device infono medical deviceCE-labeling infoitem is labeled CEHazardous material infoitem is not hazardousCountry of originorigin of item is the EUApplication fieldFor all dental thermoforming.UsageAs a short instruction the touchpanel leads you through the thermoforming process and urges you to take necessary steps. All ERKODENT thermoforming materials are covered in the software. Just choose the desired material and thickness from the touchpanel and press on start. If you wish, for special applications you can modify the shown heating and cooling down times without modifying the standards. The display always gives information about what is happening and how much time is remaining for the actual step. If you do not execute the next step, for safety reasons the machine switches off after 10 sec. It is easy to add new thermoforming materials to the software.Product-descriptionVacuum thermoforming unit with touchless temperature control, reserve vacuum and touch panel. No compressed air supply is required - just plug and play. No preheating time. Sudden vacuum, built up before thermoforming process (Pat. 19511064). More space for higher models. Perpendicular prestretching and forming produces results of even foil thicknesses. Completely accessible model during the heating process. Handy one-hand foil fixation for foil thicknesses ranging from 0 to 5 mm. The Occluform-3 can be installed (accessory).

PRECI NT Shuttle II + IV

PRECI light

UVA light for polymerisation of light curing tray material. The models can be safely put on the drawer’s ground and pushed in the inner area. It is big enough to provide space for 2 models. In case of closed drawer you are protected for ultra-violet light by a blind.

• polymerisation time automatically switched over
• short-waved ultra-violet light
• 2 or 4 fluorescent tubes
• operational by switching on / off
• CE examined unit

PRECI NT Shuttle II + IV

PRECI light

UVA light for polymerisation of light curing tray material. The models can be safely put on the drawer’s ground and pushed in the inner area. It is big enough to provide space for 2 models. In case of closed drawer you are protected for ultra-violet light by a blind.

• polymerisation time automatically switched over
• short-waved ultra-violet light
• 2 or 4 fluorescent tubes
• operational by switching on / off
• CE examined unit