Burs & Discs
-
Fraise tungstene diam. 5mm...
42.00Easy to handle the machine allows to drill precision holes in the lowe part of the model. Changing and adjusting the bit is an easy and intuitive operation. The machine works silently and without vibration. The laser in the upper part of the machine allows to locate exactly the place to drill. Its size, simplicity and ergonomics make it hte ideal device for the technique of individualizing pins. 1.85 mm and 1.95 mm spare bits available. The machine is factory supplied with a 1.85 mm bit.
CHARACTERISTICS
Height: 300 mm
Width: 165 mm
Depth: 165 mm
Voltage: 230 V, 50/60 Hz
Power: 100 W
Weight: 5 kg
Speed: 6000 rpm
-
Fraise tungstene diam. 8mm...
42.00Easy to handle the machine allows to drill precision holes in the lowe part of the model. Changing and adjusting the bit is an easy and intuitive operation. The machine works silently and without vibration. The laser in the upper part of the machine allows to locate exactly the place to drill. Its size, simplicity and ergonomics make it hte ideal device for the technique of individualizing pins. 1.85 mm and 1.95 mm spare bits available. The machine is factory supplied with a 1.85 mm bit.
CHARACTERISTICS
Height: 300 mm
Width: 165 mm
Depth: 165 mm
Voltage: 230 V, 50/60 Hz
Power: 100 W
Weight: 5 kg
Speed: 6000 rpm
-
Fraise tungstene diam. 8mm...
42.00Easy to handle the machine allows to drill precision holes in the lowe part of the model. Changing and adjusting the bit is an easy and intuitive operation. The machine works silently and without vibration. The laser in the upper part of the machine allows to locate exactly the place to drill. Its size, simplicity and ergonomics make it hte ideal device for the technique of individualizing pins. 1.85 mm and 1.95 mm spare bits available. The machine is factory supplied with a 1.85 mm bit.
CHARACTERISTICS
Height: 300 mm
Width: 165 mm
Depth: 165 mm
Voltage: 230 V, 50/60 Hz
Power: 100 W
Weight: 5 kg
Speed: 6000 rpm
-
Milling Cutter 1 Pc Nti...
9.33Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
9.33Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
9.33Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
9.33Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
9.33Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
14.78Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
14.78Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
14.78Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
14.78Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
14.78Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
14.78Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
11.60Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
14.78Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
21.22Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
17.98Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
14.78Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster. -
Milling Cutter 1 Pc Nti...
14.78Tungsten Carbide Cutters
Standard Cross Cut
Used for coarse abrasion on chrome-cobalt, chrome-nickel alloys, model cast alloys, acrylics.
Ideal for fine cutting on plaster.
