Empreinte & Duplicaat
-
Castagel Bleu 6000 gr...
95.92Vertex™ Castagel can be used in combination with Vertex™
Castavaria or Vertex™ Castapress to produce effective a full or
partial denture. With this system you use gel instead.
Shrinkage will be prevented and time will be saved while
transferring a wax setup by using a pouring type of acrylic.
NOT FOR GIPS -
Castogel 6 Kg Bego 52052
139.41Precise and safe duplicating. For demanding model casting and combination works as well as for the resin casting technique. High elasticity and firmness. Repeatedly reusable
-
Elite Double 16 Fast 5 Kg +...
279.86A-Silicone for laboratory model duplication.
Ideal for duplicating stumps using the all ceramic technique and models with accentuated undercuts and investments.
Use of a plastic duplication flask is recommended.
Advantages
- Rapidity: a duplicate can be obtained in just 10 minutes (23°)
- Mixing facilitated by the 1:1 base to catalyst ratio
- High fluidity: does not require mixing in a vacuum
- Absolute precision for faithful reproduction of detail
- Dimensional stability over time and non-deformability, allowing a number of duplications to be made
- Compatible with all plasters, polyurethane resins, phosphate and alcohol based investments and acrylic resins
Characteristics
- Fast setting time
- Extreme fluidity
- Excellent elasticity, thanks to the 16 Shore A hardness
- Purple for better definition of detail
Zhermack recommends using:
-
-
Indurent Gel 60 Ml...
12.33Indurent Gel
Gel catalyst for C-Silicones.
Advantages
FOR THE SURGERY:
- Used with the same length as Oranwash VL, Oranwash L and Thixoflex M on the mixing pad
- Total using versatility in the different impression techniques
- Easily dispensing
FOR THE LABORATORY:
- Versatility
- Easily dispensing
Characteristics
- Red gel for homogeneous mixing control
- Single catalyst for all Zhermack clinical C-silicones (Zetaplus System) and technical (Zetalabor and Titanium)
-
Ormalab 75 5Kg + 2...
93.64A polysiloxane based, condensation type material, exclusively designed for extra-oral use in the dental laboratory. Ormalab 75 is indispensable whenever high quality performances are required.
MAIN FEATURES:- Perfect compatibility with cold-curing acrylic resins.
- High precision in details reproduction.
- Long lasting dimensional stability.
- Very high compressive strength and recovery from deformation.
Sale formats- M7500 Ormalab 75 1,6kg (900 ml)
- M7510 Ormalab 75 5kg
- M7520 Ormalab 75 5kg +
2 Ormactivator 60 ml
TECHNICAL DATAMixing Time:30"Working Time (at 23°C):2' 00"Setting Time (at 23°C):4' 30"Final hardness (after 24 h):75 (±3) Shore AShelf Life:2 yearsINTENDED USE:- Matrices for fixed and total prosthesis.
- Prosthesis repairs.
- Matrices for temporary crowns and bridges.
-
Ormalab 95 5 Kg + 2 Activ...
65.85A polysiloxane based, condensation type material, exclusively designed for extra-oral use in the dental laboratory. Ormalab 95 is indispensable whenever high hardness and heat-resistance are required.
MAIN FEATURES:- Extremely high heat-resistance: over 20°C without alterations.
- High final hardness, comparable to gypsum during the milling phase.
- Perfect compatibility with self and heat curing acrylic resins.
- High precision in details reproduction.
- Long lasting dimensional stability.
Sale formats- M9500 Ormalab 95 1,6kg (900 ml)
- M9510 Ormalab 95 5kg
- M9520 Ormalab 95 5kg +
2 Ormactivator 60 ml
INTENDED USEMixing Time:30"Working Time (at 23°C):2' 00"Setting Time (at 23°C):4' 30"Durezza Final hardness (after 24 h):95 (±3) Shore AShelf Life:2 yearsINTENDED USE:- Matrices for fixed and total prosthesis.
- Prosthesis repairs.
- Duplications.
- Matrices for temporary crowns and bridges.
-
Ormamax Light 150Ml Major...
16.00Polysiloxane based, condensation-curing material for second precision impressions.
Ormamax Light specific formulation guarantees the optimal initial fluidity for an easy intraoral product flowing.
Oramamax Light doesn’t drip, it is syringeable and directly applicable on the preparation.
Ormamax Light consistency and high hydrocompatibility guarantee a perfect reproduction of fine details in every clinical condition.
Ormamax Light is the ideal product when employed both for the "single-stage double mixing technique" and for the "two-stage putty/wash technique".MAIN FEATURES:- Very high compressive strength and recovery from deformation.
- Adequate total working time.
- Easy mixing control thanks to the chromatic contrast with the gel catalyst.
Sale formats- M2010 Ormamax Light 150 ml / 165 gTECHNICAL DATATechnical Standard:ISO 4823Mixing Time:40"Working Time (a 23°C):1' 30"Setting Time (a 23°C):4' 30"Strain in compression:6-10%Recovery from deformation:98,0%Linear dimensional change (after 24 h):- 0,5%Shelf life:3 years
-
Ormamax M Regular 150Ml...
16.00Polysiloxane based, condensation-curing material for precision impressions.
Ormamax Regular specific formulation guarantees an easy intraoral product flowing.
Ormamax Regular consistency ensures a perfect reproduction of fine details in every clinical condition.
Ormamax Regular is the ideal product when employed to realize functional impressions or to obtain accurate reproductions when combined with Ormadent Putty, in the “two-stage putty/wash technique”.MAIN FEATURES:- Very high compressive strength and recovery from deformation.
- Adequate total working time.
- Easy mixing control thanks to the chromatic contrast with the gel catalyst.
Sale formats- M2000 Ormamax Regular 150 ml / 205 gTECHNICAL DATA:Technical Standard:ISO 4823Mixing Time:40"Working Time (a 23°C):1' 30"Setting Time (a 23°C):4' 30"Strain in compression:6-10%Recovery from deformation:98,0%Linear dimensional change (after 24 h):- 0,5%Shelf life:3 years
-
-
-
Orthoprint 500 Gr C302145
10.10Orthoprint
Extra-rapid dust free, orthodontic alginate and study models
Advantages
- Fast water absorption
- Easy mixing
- Homogenous mass, smooth, compact surfaces
- Long impression storage
- Safe disinfection with Zeta 7 Solution and Zeta 7 Spray
- Simple and fast mixing without bubbles with Alghamix II
- 5-year shelf life
Characteristics
- Highly elastic alginate
- Extra-rapid fast working and setting times
- Thixotropic
- Pleasant vanilla flavour with emetic reflex reduction
- Yellow colour
- Dust free
Zhermack recommends using:
- Alghamix II guarantees a uniform, bubble-free mix
- Algitray: Special neutral pH cleansing agent for alginates
-
Platinum 95 (1 + 1) Kg C400700
45.16High precision laboratory A-Silicone putty material.
Use
- Duplication of denture moulds
- Ceramics technique printed on verticulator
- Die in full dentures
- Control matrix for the design of metal structures
- Denture repair
- Bite recording key for positioning in articulator
- Matrix for use in making temporary crowns/bridges
- Matrix support for the working of metal free aesthetic materials
- Insulation of teeth/plaster in muffle
Advantages
- Very high flowability
- Superior dimensional stability
- Heat resistance (over 200°C)
- Easy handling
- Excellent detail definition
- Can be milled
- Linear variation: -0.058% after 24 hours
- No deformation in flask
Characteristics
- 1:1 Mixing ratio
- Biocompatible
- Final hardness 95 Shore A
- Light blue colour
Warning: it is advisable not to use latex gloves. -
Platinum 95 (5 + 5) Kg C400710
157.82High precision laboratory A-Silicone putty material.
Use
- Duplication of denture moulds
- Ceramics technique printed on verticulator
- Die in full dentures
- Control matrix for the design of metal structures
- Denture repair
- Bite recording key for positioning in articulator
- Matrix for use in making temporary crowns/bridges
- Matrix support for the working of metal free aesthetic materials
- Insulation of teeth/plaster in muffle
Advantages
- Very high flowability
- Superior dimensional stability
- Heat resistance (over 200°C)
- Easy handling
- Excellent detail definition
- Can be milled
- Linear variation: -0.058% after 24 hours
- No deformation in flask
Characteristics
- 1:1 Mixing ratio
- Biocompatible
- Final hardness 95 Shore A
- Light blue colour
Warning: it is advisable not to use latex gloves.
