Others

BLUE MIXING BOWLS FOR PLASTER/ALGINATE DIAM.CM.10

BLUE MIXING BOWLS FOR PLASTER/ALGINATE DIAM.CM.12

BLUE MIXING BOWLS FOR PLASTER/ALGINATE DIAM.CM.14

BLUE MIXING BOWLS FOR PLASTER/ALGINATE DIAM.CM.14

BLUE MIXING BOWLS FOR PLASTER/ALGINATE DIAM.CM.16

DIE BLOC
light cure blocking out material

suitable to be used with all SPACER`s does not build up any dispersion layers aimed at precise application due to its fluid and paste consistancy thermostability by dipping aviable and ready in syringe

Curing time:ca. 4-5 min. depending on the material thickness and the power of the
light curing unit

Digiscan Spray

For optimal scanning.

Reduces reflections of objects to be scanned.

Description

Vertex™ Divosheet is a highly flexible polyethylene sheet to be used in the trial pressing method. Per box 1000 sheets.

Before we are placing the flask with the dough under the hydraulic press, put a Divosheet over the dough in the flask. Than place the upper part of the flask and close the flask. Place the flask under the hydraulic press and slowly press the flask until the moment that all the rest dough came out. Remove the flask from the hydraulic press and open it again. Remove the Divosheet and the rest dough. Close the flask again and continue the pressing technique. By doing these steps in the process, the bite raise will be prevented.

The numerous round perforations provide excellent resin bond to ensure a strong, stabilized denture base.

OCCLUSAL SPRAY, green

For the recognition of high spots.

• targeted spraying
• thin dosing thanks to fine valve
• does not blob
• 100% water soluble
• can easily be washed off from sealed plaster surfaces
  (to be washed off before porcelain firing or embedding!)
• adheres to metal, ceramics, plaster and synthetics
• environment friendly: pressurized gas mixture not harmful to the ozone layer

OCCLUSAL SPRAY, green, Art.-Nr. 580-2007
OCCLUSAL SPRAY, red, Art.-Nr. 580-2008
OCCLUSAL SPRAY, blue, Art.-Nr. 580-2009
OCCLUSAL SPRAY, white, Art.-Nr. 580-2010

OCCLUSAL SPRAY, green

For the recognition of high spots.

• targeted spraying
• thin dosing thanks to fine valve
• does not blob
• 100% water soluble
• can easily be washed off from sealed plaster surfaces
  (to be washed off before porcelain firing or embedding!)
• adheres to metal, ceramics, plaster and synthetics
• environment friendly: pressurized gas mixture not harmful to the ozone layer

OCCLUSAL SPRAY, green, Art.-Nr. 580-2007
OCCLUSAL SPRAY, red, Art.-Nr. 580-2008
OCCLUSAL SPRAY, blue, Art.-Nr. 580-2009
OCCLUSAL SPRAY, white, Art.-Nr. 580-2010

Quick Up
Self-curing luting material for attachments and secondary denture parts

Indications
Gingiva-coloured composite for luting attachments, such as ball, Locator® and telescope retention elements in prostheses with plastic bases
Reluting secondary elements in prostheses with plastic bases, e.g., connecting bars
Advantages
Quite simple chairside use
High strength values
Complete set for immediate use, including checking and blockout material for primary structures that require protection, e.g., implants
Ideal combination of self-curing luting material and light-curing correction material

The original WAPO retention bar is used for total lower dentures. It’s main features are the retentions welded outside of the bar, as well as the plaster hooks on both sides.
The bar is available in of 6, 7, and 8 cm sizes. The bar is tension free and highly pliable when ordered in soft form.

The original WAPO retention bar is used for total lower dentures. It’s main features are the retentions welded outside of the bar, as well as the plaster hooks on both sides.
The bar is available in of 6, 7, and 8 cm sizes. The bar is tension free and highly pliable when ordered in soft form.

Flash-curing device for rapid and reliable curing of light curable resins

Dimensions of polymerisation chamber: 120 x 120 x 50 mm
Number of light sources: 2 flashbulbs à 100 w
Capacity: 4 BTE-aids or 6 ITE-aids
Rated voltage: 100, 117, 230 volt AC, adjustable by switch
Rated frequency: 50/60 Hz
Power input: 250 watt
Spectral distribution: 280-700 nm, maximum between 400 and 500 nm
Average flash power: 200 watt
Flash frequency: 10 flashes per second
Digital timer: adjustable from 1 to 9.999 flashes
Dimensions: 310 x 310 x 140 mm
Weight: 6 kg x 140 mm Weight: 6 kg