Materialen

Resin for solid or hollow 3D printing of dental full and partial models as well as models with removable dies.

Suitable for duplication with silicone or gel as well as for the fabrication of splints, aligners, etc. using the thermoforming technique.

Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time.

The dimensional stability and the smooth and pore-free surfaces of the printed models are the ideal basis for the fabrication of high-precision restorations.

Can be insulated against adhesive wax, is resistant to moisture in order to facilitate problem-free cleaning and accordingly, its handling during processing is comparable to that of a conventional plaster model.

Optimal visibility of all model contours and preparation margins due to the opaque gray color of the models.

Suitable for processing in DLP 3D printers with a wavelength from 385 nm to 405 nm.

Easy and error-free to process – high physical stability minimizes sedimentation during storage and facilitates mixing.

VarseoWax CAD/Cast

The resin for 3D printing of burn-out CAD/Cast partial denture frames and press-to-metal templates

Can be burned out without leaving any residue – provides optimal conditions for pore-free, smooth and precise partial dentures

Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time

Further processing with the investment materials VarseoVest P plus and VarseoVest C&B, specially developed for shock-heat investing of 3D printed objects possible

Excellent dimensional stability of the printed objects enables deformation-free investment and thus an excellent accuracy of fit of the casted objects

Printed plastic boasts first-class green strength, so that no lightcuring is necessary if frames are processed immediately – results in unparalleled process time savings

Technical specifications

Color yellow
Modulus of elasticity = 1,500 MPa
Viscosity 600 – 900 mPa*s
Shore hardness D 79 – 83 D
Density at 22 °C 1.08 g/cm³
Thermal stability at 55 °C 1.8 MPa
Flexural strength = 50 MPa
Residual ash content = 0.1 % bei 700 °C
Wavelength 405 nm

For Temporary Crown

3D resin, class IIA

3D resin, class IIA

Solibond C plus blank CoCr alloy (non precious)
For ceramics Biocompatible - Laser-capable Quick polishing and surface gloss - Optimal bonding with ceramics -

Material properties Vickers hardness: 280 HV Elongation: 10,1 % CTE (20 - 600°C) 14,0 · 10-6 K-1 -

Alloy components Co 63% Cr 29% Mo 5,8% Si 1,2% Fe <0,1% Mn <0,1% Nb <0,1%

Solibond C plus blank CoCr alloy (non precious)
For ceramics Biocompatible - Laser-capable Quick polishing and surface gloss - Optimal bonding with ceramics - Material properties Vickers hardness: 280 HV Elongation: 10,1 % CTE (20 - 600°C) 14,0 · 10-6 K-1 - Alloy components Co 63% Cr 29% Mo 5,8% Si 1,2% Fe <0,1% Mn <0,1% Nb <0,1%

CAVEX SCANSPRAY
Cavex ScanSpray is ontwikkeld om de scanbaarheid van alginaatafdrukken te optimaliseren. Door de toevoeging van titaandioxide zijn zelfs de kleinste details duidelijk leesbaar. De spray is op poederbasis, waardoor het voor elk type afdrukmateriaal geschikt is.

Breng een dun laagje Cavex ScanSpray aan op de afdruk voor een supergedetailleerd digitaal model van de afdruk.

Voor een supergedetailleerd digitaal model van de afdruk
Geschikt voor alle soorten afdrukmateriaal
Op poederbasis in plaats van oliebasis

MEDILOY M-Co
Co 63.8 · Cr 24.8 · W 5.3 · Mo 5.1 · Si 1.0

Your advantages
Approved for crowns and bridges, metal-ceramics as well as implant prosthetics
Biocompatible and corrosion-resistant like all BEGO alloys
The special heat treatment used in production provides the user with a reduced tool wear while milling by up to 30% a homogeneous structure – no cavities or porosities a material that is particularly easy to mill
Reduced hardness of 290 HV10 enables easier polishing

Expension (CTE) 14,4
Density 8,6 gr/cm³
Vickers hardness : 290 HV10

VIVA UT-ML - CE 0120
Ultra Translucent Multi Layer Zirconia UT-ML

Certified Viva UTML zirconia allows the processing of cases with exceptional aesthetic. With 557 Mpa, the hardness is 50% inferior to a conventional zirconia.

Applications: Veneers, Anterior crowns, Inlays, Onlays, Posterior crowns

Order no.613050Description (name)Degreasing agentadditional infoContents50Unit of contentsmlMedical device infono medical deviceCE-labeling infoitem is not labeled CEHazardous material infoitem is hazardousCountry of originorigin of item is the EUApplication fieldEnsures the firm bonding between ERKOFLEX-types.UsageProduct-descriptionFor cleaning and degreasing of thermoforming materials before their combination.

INSPIRED BY TEETH

Natural beauty in all forms.

Do full contour zirconia prosthetics look natural? Yes! With Zirconia ST-ML light is transmitted in the incisal area and blocked in the cervical area. Giving you the flexibility to make beautifull full contour prothetics - regardless of the abutment color.

Ideal for up to 3 units posterior bridges with a well-balanced combination of chromatic and gradational translucency, which reproduces esthetic enamel and dentin effects.

Properties

Flexural strength: 748 MPa

Thermal expansion (25-500°C): 9.8

Composition: ZrO2 + HfO2, Y2O3 etc.

Translucency: 38 %

Sintering temperature: 1550°C

INSPIRED BY TEETH

Natural beauty in all forms.

Do full contour zirconia prosthetics look natural? Yes! With Zirconia ST-ML light is transmitted in the incisal area and blocked in the cervical area. Giving you the flexibility to make beautifull full contour prothetics - regardless of the abutment color.

Ideal for up to 3 units posterior bridges with a well-balanced combination of chromatic and gradational translucency, which reproduces esthetic enamel and dentin effects.

Properties

Flexural strength: 748 MPa

Thermal expansion (25-500°C): 9.8

Composition: ZrO2 + HfO2, Y2O3 etc.

Translucency: 38 %

Sintering temperature: 1550°C

INSPIRED BY TEETH

Natural beauty in all forms.

Do full contour zirconia prosthetics look natural? Yes! With Zirconia ST-ML light is transmitted in the incisal area and blocked in the cervical area. Giving you the flexibility to make beautifull full contour prothetics - regardless of the abutment color.

Ideal for up to 3 units posterior bridges with a well-balanced combination of chromatic and gradational translucency, which reproduces esthetic enamel and dentin effects.

Properties

Flexural strength: 748 MPa

Thermal expansion (25-500°C): 9.8

Composition: ZrO2 + HfO2, Y2O3 etc.

Translucency: 38 %

Sintering temperature: 1550°C

Light-curing, flexible resin for fabrication of transfer masks in the indirect bonding technique, transparent.
Compatible with DLP systems with a light source of 385 nm.

Density: approx. 1.1 g/ml
Viscosity: At 23 ° C approx. 2.5 PAS
Material hardness after curing: approx. 40 shore D

FotoDent® tray2 385/405 nm

Geoptimaliseerde, biocompatibele hars voor de vervaardiging van tandheelkundige, individuele afdruklepels. Hoge reactiviteit met lage viscositeit. Vereenvoudigde reiniging en verbeterde mechanische eigenschappen. Twee keer snellere afdruktijden, laagdiktes van 300 µm mogelijk. De afgewerkte afdruklepels hebben een homogeen oppervlak, wat de handmatige nabewerking aanzienlijk vermindert.

Highlights

Hoge afdruksnelheid
Eenvoudige reiniging
Extreem hoge breeksterkte

3D printing UV Resin
405 nm

- Shake well before use.
- Wear gloves and mask before use, avoid direct skin contact.
- Wash with plenty of fresh water if there is any accidently skin.
- Do not orally, keep away from children.
- The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
- Using temperatue : 25 - 30° C

3D printing UV Resin
405 nm

- Shake well before use.
- Wear gloves and mask before use, avoid direct skin contact.
- Wash with plenty of fresh water if there is any accidently skin.
- Do not orally, keep away from children.
- The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
- Using temperatue : 25 - 30° C

EASY blank wax

Was-doorslijpschijf voor CAD / CAM-systemen
Wasbewerkingsschijf voor CAD / CAM-systemen ontworpen voor de fabricage van computermodelleerde kronen en bruggen voor pers- en giettechnieken.


Voordelen

Biedt zuivere freesresultaten met zeer gladde oppervlakken en zeer stabiele randen en contouren dankzij de hoge materiaalhomogeniteit.
Bijzonder geschikt voor volledig keramische restauraties, omdat het zonder residu kan worden uitgebrand.
Veilig frezen door de vorming van kleine spanen zonder de frees te verstoppen of vast te kleven aan het werkstukoppervlak.

Details

De wasschuurschijf voor Renfert EASY blank wax CAD / CAM-systemen is ideaal voor het verkrijgen van gefreesde restauraties met de typische Renfert “made in Germany” kwaliteit.
Het motto "Making work easy" staat synoniem voor uitzonderlijke eigenschappen, zoals een grote homogeniteit van het materiaal.
Dit garandeert onder meer een perfecte precisie en een onberispelijke kwaliteit van de oppervlakken van de uiteindelijke restauratie.

EASY blank wax

Was-doorslijpschijf voor CAD / CAM-systemen
Wasbewerkingsschijf voor CAD / CAM-systemen ontworpen voor de fabricage van computermodelleerde kronen en bruggen voor pers- en giettechnieken.


Voordelen

Biedt zuivere freesresultaten met zeer gladde oppervlakken en zeer stabiele randen en contouren dankzij de hoge materiaalhomogeniteit.
Bijzonder geschikt voor volledig keramische restauraties, omdat het zonder residu kan worden uitgebrand.
Veilig frezen door de vorming van kleine spanen zonder de frees te verstoppen of vast te kleven aan het werkstukoppervlak.

Details

De wasschuurschijf voor Renfert EASY blank wax CAD / CAM-systemen is ideaal voor het verkrijgen van gefreesde restauraties met de typische Renfert “made in Germany” kwaliteit.
Het motto "Making work easy" staat synoniem voor uitzonderlijke eigenschappen, zoals een grote homogeniteit van het materiaal.
Dit garandeert onder meer een perfecte precisie en een onberispelijke kwaliteit van de oppervlakken van de uiteindelijke restauratie.

A surface disinfectant designed for non invasive medical devices.
Alcohol based formulation containing 55% Ethanol + 19% Isopropanol. Solution has a pleasant lemon aroma
Bactericidal, Yeasticidal, Fungicidal and Tuberculocidal.
Also effective against viruses such as Adeno, Noro, HIV, and Hep C with a contact time of only 60 seconds.

ZIRCONE DISK 98 mm pre-shaded

The pre-shaded Zirconia is available in 16 colors with same translucency like the SHT material, but is eliminating the need of staining or dipping. Accurate colors after sintering makes it for technicians easier to achieve stable and esthetic results. Thanks to the innovative and brilliant craftmanship, the SHT pre-shaded material will save you time and costs and provide remarkable restorations.

CE 0197

Translucency : 43%
Bending Strength : > 1000 Mpa
Hardness : 1250 Hv10

ZIRCONE DISK 98 mm pre-shaded

The pre-shaded Zirconia is available in 16 colors with same translucency like the SHT material, but is eliminating the need of staining or dipping. Accurate colors after sintering makes it for technicians easier to achieve stable and esthetic results. Thanks to the innovative and brilliant craftmanship, the SHT pre-shaded material will save you time and costs and provide remarkable restorations.

CE 0197

Translucency : 43%
Bending Strength : > 1000 Mpa
Hardness : 1250 Hv10

ZIRCONE DISK 98 mm pre-shaded

The pre-shaded Zirconia is available in 16 colors with same translucency like the SHT material, but is eliminating the need of staining or dipping. Accurate colors after sintering makes it for technicians easier to achieve stable and esthetic results. Thanks to the innovative and brilliant craftmanship, the SHT pre-shaded material will save you time and costs and provide remarkable restorations.

CE 0197

Translucency : 43%
Bending Strength : > 1000 Mpa
Hardness : 1250 Hv10

ZIRCONE DISK 98 mm pre-shaded

The pre-shaded Zirconia is available in 16 colors with same translucency like the SHT material, but is eliminating the need of staining or dipping. Accurate colors after sintering makes it for technicians easier to achieve stable and esthetic results. Thanks to the innovative and brilliant craftmanship, the SHT pre-shaded material will save you time and costs and provide remarkable restorations.

CE 0197

Translucency : 43%
Bending Strength : > 1000 Mpa
Hardness : 1250 Hv10

ZIRCONE DISK 98 mm pre-shaded

The pre-shaded Zirconia is available in 16 colors with same translucency like the SHT material, but is eliminating the need of staining or dipping. Accurate colors after sintering makes it for technicians easier to achieve stable and esthetic results. Thanks to the innovative and brilliant craftmanship, the SHT pre-shaded material will save you time and costs and provide remarkable restorations.

CE 0197

Translucency : 43%
Bending Strength : > 1000 Mpa
Hardness : 1250 Hv10

ZIRCONE DISK 98 mm pre-shaded

The pre-shaded Zirconia is available in 16 colors with same translucency like the SHT material, but is eliminating the need of staining or dipping. Accurate colors after sintering makes it for technicians easier to achieve stable and esthetic results. Thanks to the innovative and brilliant craftmanship, the SHT pre-shaded material will save you time and costs and provide remarkable restorations.

CE 0197

Translucency : 43%
Bending Strength : > 1000 Mpa
Hardness : 1250 Hv10

ZIRCONE DISK 98 mm pre-shaded

The pre-shaded Zirconia is available in 16 colors with same translucency like the SHT material, but is eliminating the need of staining or dipping. Accurate colors after sintering makes it for technicians easier to achieve stable and esthetic results. Thanks to the innovative and brilliant craftmanship, the SHT pre-shaded material will save you time and costs and provide remarkable restorations.

CE 0197

Translucency : 43%
Bending Strength : > 1000 Mpa
Hardness : 1250 Hv10