Printermateriaal

  • Agitateur de resine Mestra...

    € 292,62

    Practical and economical device for shaking photopolymerizable resin bottles.
    To obtain a homogeneous mixture of the resin.
    Indispensable for successful achievements with the 3D printer.

  • Fleet M Brown - UV Resin...

    € 158,92

    3D printing UV Resin
    405 nm

    - Shake well before use.
    - Wear gloves and mask before use, avoid direct skin contact.
    - Wash with plenty of fresh water if there is any accidently skin.
    - Do not orally, keep away from children.
    - The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
    - Using temperatue : 25 - 30° C

  • Fleet M Sand - Resin UV...

    € 158,92

    3D printing UV Resin
    405 nm

    - Shake well before use.
    - Wear gloves and mask before use, avoid direct skin contact.
    - Wash with plenty of fresh water if there is any accidently skin.
    - Do not orally, keep away from children.
    - The UV resin may cause allergic reaction, please seek medical if allefgic reaction happens.
    - Using temperatue : 25 - 30° C

  • IMPRIMO LC IBT,...

    € 283,00

    Light-curing, flexible resin for fabrication of transfer masks in the indirect bonding technique, transparent.
    Compatible with DLP systems with a light source of 385 nm.

    Density: approx. 1.1 g/ml
    Viscosity: At 23 ° C approx. 2.5 PAS
    Material hardness after curing: approx. 40 shore D

  • VarseoWax CAD/Cast 1kg Bego...

    € 299,90

    VarseoWax CAD/Cast

    The resin for 3D printing of burn-out CAD/Cast partial denture frames and press-to-metal templates

    Can be burned out without leaving any residue – provides optimal conditions for pore-free, smooth and precise partial dentures

    Specially for the resin developed printing and processing parameters ensure smooth production sequences with reproducible results at any time

    Further processing with the investment materials VarseoVest P plus and VarseoVest C-B, specially developed for shock-heat investing of 3D printed objects possible

    Excellent dimensional stability of the printed objects enables deformation-free investment and thus an excellent accuracy of fit of the casted objects

    Printed plastic boasts first-class green strength, so that no lightcuring is necessary if frames are processed immediately – results in unparalleled process time savings

    Technical specifications

    Color yellow
    Modulus of elasticity = 1,500 MPa
    Viscosity 600 – 900 mPa*s
    Shore hardness D 79 – 83 D
    Density at 22 °C 1.08 g/cm³
    Thermal stability at 55 °C 1.8 MPa
    Flexural strength = 50 MPa
    Residual ash content = 0.1 % bei 700 °C
    Wavelength 405 nm

  • VarseoWax Tray 1kg Resine...

    € 246,94

    VarseoWax TrayDe kunstof voor het 3D-printen van individuele afdrukladen Speciale kunstof voor 3D-afdrukken van individuele afdrukladen met de Varseo S BEGO-printer VarseoWax Tray is bestand tegen water en oplosmiddelen Gedrukte objecten kunnen zonder beperking voor alle afdrukmaterialen worden gebruikt Weerstand tegen vervorming en hoge stevigheid zorgen voor een precieze en perfect sta...