Losse Prothese

  • Alloy Primer 5Ml Kuraray 064Eu


    ALLOY PRIMER is een metaalconditioner, die de hechtkracht van composiet aan goud, onedele en half edele metalen, titanium en andere dentale legeringen vergroot. Het zorgt voor een excellente hechting aan metalen oppervlakken. Dankzij de unieke chemische eigenschappen van ALLOY PRIMER hecht composiet goed aan zulke legeringen. ALLOY PRIMER kan ook worden gebruikt tijdens de reparatie van gebroken restauratieve materialen in de tandartspraktijk en in het laboratorium.

    ALLOY PRIMER is erg eenvoudig en zuinig in gebruik. Breng een laag ALLOY PRIMER op een gezandstraald metalen oppervlak aan en laat die 3 seconden
    inwerken. Vervolgens wordt de adhesiefprocedure zoals gebruikelijk uitgevoerd.

    Kenmerken:
    - breed indicatiegebied
    - intra- en extraoraal gebruik
    - verhoogt de hechtkracht aan goud
    - verhoogt de hechtkracht aan halfedele metalen
    - eenvoudig in gebruik
    - tijdbesparend

    Indicaties:
    - adhesie van metalen kronen, bruggen, inlays, onlays en stiften en stompen
    - reparatie van gebroken kronen op composietbasis en van metalen kronen en bruggen met een porseleinlaag
    - vervaardiging van frameprothesen
    - reparatie van frameprothesen

    Inhoud:
    1 flesje 5 ml



  • Castapress 1 Kg Vertex N°3

    Vertex Castapress Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear....

  • Castapress 1 Kg Vertex N°5

    Vertex Castapress-nbsp;Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures-nbsp;Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear....

  • Castapress 1000ml Vertex

    Vertex Castapress-nbsp;Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures-nbsp;Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear....

  • Castapress 4 Kg Vertex N°10

    Vertex Castapress-nbsp;Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures-nbsp;Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear....

  • Castapress 4 Kg Vertex N°3

    Vertex Castapress-nbsp;Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures-nbsp;Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear....

  • Castapress 4 Kg Vertex N°5

    Vertex Castapress-nbsp;Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures-nbsp;Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear....

  • Castapress 4 Kg Vertex N°7

    Vertex Castapress-nbsp;Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures-nbsp;Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear....

  • Castapress 500 Ml Vertex

    Vertex Castapress-nbsp;Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures-nbsp;Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear....

  • Castapress 5000 Ml Vertex

    Vertex Castapress-nbsp;Indications:Full and partial denturesRepair, relining and rebasing of denturesFinishing of framework Repair, relining and rebasing of dentures Extensions to dentures-nbsp;Description:Vertex™ Castapress is a self polymerizing pouring/casting type denture base material also suitable for repair, relining, rebasing and extensions of partial dentures. The colour stability of the material is excellent because of the use of an unique accelerator system. Using Acrylic on frames is educated at the Vertex™ Dental Academy by using Vertex™ Castapress. Also available in Castapress Crystal Clear....

  • Cobavest 1000Ml Yeti 941-1000

    COBAVEST Investment for Partial Denture, suitable to be used for the traditional preheating method but also as speed investmentCOBAVEST is a phosphate-bonded precision investment material to be used in the partial denture technique, for Silicon, Polyether and also Gel duplications.COBAVEST can be used at low preheaating temperature, for model duplications without hardening or dipping of the models....

  • Cobavest Cr/Co 100X200Gr +...

    COBAVEST Investment for Partial Denture, suitable to be used for the traditional preheating method but also as speed investmentCOBAVEST is a phosphate-bonded precision investment material to be used in the partial denture technique, for Silicon, Polyether and also Gel duplications.COBAVEST can be used at low preheaating temperature, for model duplications without hardening or dipping of the models....

  • Cobavest Cr/Co 100X200Gr...

    COBAVEST Investment for Partial Denture, suitable to be used for the traditional preheating method but also as speed investmentCOBAVEST is a phosphate-bonded precision investment material to be used in the partial denture technique, for Silicon, Polyether and also Gel duplications.COBAVEST can be used at low preheaating temperature, for model duplications without hardening or dipping of the models....

  • Crochets Boule 0.7 Mm 100...

    SCHEU-Anchor 0.7 mm
    Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
    stainless steel alloy; fabricated in a cutting and cold forming process.
    One piece without any soldering connection with high polished surface.
    Perfect elasticity and stability.
    Clasps and Bars

  • Crochets Boule 0.8 Mm 100...

    SCHEU-Anchor 0.8 mm

    Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
    stainless steel alloy; fabricated in a cutting and cold forming process.
    One piece without any soldering connection with high polished surface.
    Perfect elasticity and stability.
    Clasps and Bars

  • Crochets Boule 0.9 Mm 100...

    SCHEU-Anchor 0.9 mm 100 Pcs

    Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
    stainless steel alloy; fabricated in a cutting and cold forming process.
    One piece without any soldering connection with high polished surface.
    Perfect elasticity and stability.
    Clasps and Bars.

  • crochets boules 1.0 mm 100...

    SCHEU-Anchor 1.0 mm - 100 Pcs
    Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
    stainless steel alloy; fabricated in a cutting and cold forming process.
    One piece without any soldering connection with high polished surface.
    Perfect elasticity and stability.
    Clasps and Bars

  • Implacryl 250 Ml Vertex

    Vertex Implacryl-nbsp;Indications:dentures fitted on implants full and partial dentures-nbsp;Description:Vertex™ Implacryl is a heat-curing extra strong denture base material developed for the production of complete and partial dentures and in particular for over-dentures on implants. The pressing technique is the processing method for Vertex™ Implacryl. Using high impact acrylic in implant work is educated at the Vertex™ Dental Academy to prevent breaking of dentures due to the lack of space.-nbsp;Technical specifications:Dough time20 - 25 minutesWorking time5 - 7 minutesCuring timeStart at 70° for 90 minutes 30 minutes at 100°CMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (m...

  • Implacryl 500 Gr N°3 Vertex

    Vertex Implacryl-nbsp;Indications:dentures fitted on implants full and partial dentures-nbsp;Description:Vertex™ Implacryl is a heat-curing extra strong denture base material developed for the production of complete and partial dentures and in particular for over-dentures on implants. The pressing technique is the processing method for Vertex™ Implacryl. Using high impact acrylic in implant work is educated at the Vertex™ Dental Academy to prevent breaking of dentures due to the lack of space.-nbsp;Technical specifications:Dough time20 - 25 minutesWorking time5 - 7 minutesCuring timeStart at 70° for 90 minutes 30 minutes at 100°CMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (m...

  • Implacryl 500 Ml Vertex

    Vertex Implacryl-nbsp;Indications:dentures fitted on implants full and partial dentures-nbsp;Description:Vertex™ Implacryl is a heat-curing extra strong denture base material developed for the production of complete and partial dentures and in particular for over-dentures on implants. The pressing technique is the processing method for Vertex™ Implacryl. Using high impact acrylic in implant work is educated at the Vertex™ Dental Academy to prevent breaking of dentures due to the lack of space.-nbsp;Technical specifications:Dough time20 - 25 minutesWorking time5 - 7 minutesCuring timeStart at 70° for 90 minutes 30 minutes at 100°CMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (m...

  • Implacryl 75 ml Vertex

    Vertex Implacryl-nbsp;Indications:dentures fitted on implants full and partial dentures-nbsp;Description:Vertex™ Implacryl is a heat-curing extra strong denture base material developed for the production of complete and partial dentures and in particular for over-dentures on implants. The pressing technique is the processing method for Vertex™ Implacryl. Using high impact acrylic in implant work is educated at the Vertex™ Dental Academy to prevent breaking of dentures due to the lack of space.-nbsp;Technical specifications:Dough time20 - 25 minutesWorking time5 - 7 minutesCuring timeStart at 70° for 90 minutes 30 minutes at 100°CMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (m...

  • Implacryl Cold 500 ml Vertex

    Vertex Implacryl-nbsp;Indications:dentures fitted on implants full and partial dentures-nbsp;Description:Vertex™ Implacryl is a heat-curing extra strong denture base material developed for the production of complete and partial dentures and in particular for over-dentures on implants. The pressing technique is the processing method for Vertex™ Implacryl. Using high impact acrylic in implant work is educated at the Vertex™ Dental Academy to prevent breaking of dentures due to the lack of space.-nbsp;Technical specifications:Dough time20 - 25 minutesWorking time5 - 7 minutesCuring timeStart at 70° for 90 minutes 30 minutes at 100°CMixing ratio by volume / parts by weight1 ml / 0.95 g liquid (m...

  • J Klammer 0.8 Mm 100 Stk...

    SCHEU-Anchor and J-clasps (1017.2)
    Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
    stainless steel alloy; fabricated in a cutting and cold forming process.
    One piece without any soldering connection with high polished surface.

    Ø 0,8 mm

  • Klammer J 0.8Mm 10Stk Scheu...

    SCHEU J-clasps 0.8 mm 10 Pcs
    5 right + 5 left

    Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
    stainless steel alloy; fabricated in a cutting and cold forming process.
    One piece without any soldering connection with high polished surface.

  • Klammer J 0.9Mm 10Stk Scheu...

    SCHEU-Anchor and J-clasps
    Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
    stainless steel alloy; fabricated in a cutting and cold forming process.
    One piece without any soldering connection with high polished surface.
    Ø 0,9 mm
    SCHEU 1018

  • Klammer J 0.9Mm 10Stk Scheu...

    SCHEU J-clasps 0.9 mm - 10 Pcs
    Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
    stainless steel alloy; fabricated in a cutting and cold forming process.
    One piece without any soldering connection with high polished surface.

  • Klammer J 1.0 Mm 10 St...

    SCHEU-J-clasps 1.0 mm - 10 Pcs
    Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
    stainless steel alloy; fabricated in a cutting and cold forming process.
    One piece without any soldering connection with high polished surface.

  • Klammer J 1.0 Mm 10 Stk...

    SCHEU-J-clasps 1,0 mm - 10 Pcs
    5 right + 5 left
    Preformed clasps consisting of a mouth-tolerant, high corrosion-resistant
    stainless steel alloy; fabricated in a cutting and cold forming process.
    One piece without any soldering connection with high polished surface.