Cad/Cam

Practical and economical device for shaking photopolymerizable resin bottles.
To obtain a homogeneous mixture of the resin.
Indispensable for successful achievements with the 3D printer.

Special mixing liquid for BEGO investment materials.
BellaStar XL - WiroFine - VarseVest P plus.

CAD/CAM PMMA blanks In one color, transparent or layered For production of temporary crowns and bridges High break strength and good processing characteristics Very natural and aesthetic layering is modeled on the natural characteristics (layered blanks) Available in different colors and thicknesses

CAD/CAM PMMA blanks In one color, transparent or layered For production of temporary crowns and bridges High break strength and good processing characteristics Very natural and aesthetic layering is modeled on the natural characteristics (layered blanks) Available in different colors and thicknesses

CAD/CAM PMMA blanks In one color, transparent or layered For production of temporary crowns and bridges High break strength and good processing characteristics Very natural and aesthetic layering is modeled on the natural characteristics (layered blanks) Available in different colors and thicknesses

HIGH SCANNING PERFORMANCE
Be it a single preparation, a full arch gypsum model or a triple-tray impression, the 7DS efficiently captures clinical data. It scans preparations with excellent marginal integrity, providing precise fit for a wide variety of dental indications. Specifically for Screw Retained Bars and Bridges (SRBB), we have developed a certified scanning workflow.

The scanning performance of the 7DS is the result of a combination of years of mechanical engineering experience with state-of-the-art technology components. The optical set-up, running with five axes of freedom and two high-speed cameras, gives access to a superior scanning volume (140 mm x 140 mm x 140 mm) with a high degree of accuracy. The scan chamber is large enough for fully articulated models.

DESIGN-READY FOR SEVERAL DENTAL INDICATIONS
The 7DS is ready for receiving digital impressions from clinics and for complete in-lab digital workflow. As it includes a versatile DWOS software package, it enables the dental technician to design crowns - bridges, partial frameworks, screw-retained bars - bridges, implant abutments, and more. Virtual models can be generated from impression scans and output for fabrication.

THE 7DS HIGHLIGHTS :
High precision scanning of both models and impressions
On-board computer with 64-bit processor
High productivity through automatic scan and design wizards
High capacity scan and design for dies: 30 copings in 15 minutes
Easy clinic-to-lab or lab-to-outsourcing communication with DWOS Connect
SAM® SE articulator included
Certified scan workflow for screw-retained bars - bridges (optional)
Certified by 3M ESPE, Straumann and Dentsply Implants

Multilayer 3D

Layer 1 of 20% at strength +/- 600 Mpa
Layer 2 de 15% at strength+/- 660 Mpa
Layer 3 de 15% at strength de +/- 730 Mpa
Layer 4 de 15% at strength de +/- 780 Mpa
Layer 5 de 15% at strength de +/- 830 Mpa
Layer 6 de 20% at strength de +/- 900 Mpa


Composition :

Y2O3 = 9,28wt%
AI2O3 = 0,05wt%
SiO2 < 0.15wt%
CO3O4 <0.02wt%

Finished :

at 1450°C before 60 mins